I just built my first pc, but when I start it doesn't give me any signals on the screen (it keeps saying "no signal"). I don't know where the problem could be. I think I've set all the cables correctly and every part should be in the right place. I tried to clean ram sticks and placed them in other positions and I've cleared CMOS too.
My components are:
-amd itx radeon Rx 6400
-corsair vengeance lpx ddr4(2x8 GB)
-wd Blue SN570 (500 GB)
-asus prime b550m-k
-amd ryzen 5 5500
-600 w Gold evga
Solved! Go to Solution.
Ive maybe found the solution. It seems that the graphic card has a problem with the part that connects to the mother board. Thx for the reply hrpuffnstuff:)
Is the monitor set to the input port you are trying to use? Are you plugged into the gpu port or the onboard port? Have you tried switching outputs? Have you tried a different cable? Have you tried a different monitor? Does the monitor work on another pc?
Yes the monitor is on the exact output and it works with other devices. I even tried with different cable but the issue persists. I tried both the onboard port and the GPU port but it doesn't change anything.
Ive maybe found the solution. It seems that the graphic card has a problem with the part that connects to the mother board. Thx for the reply hrpuffnstuff:)