Gigabyte RX 560 2GB
Desktop
Windows 10 64bit
Radeon Software Adrenalin 2019 Edition 19.1.1
Acer KG221Q 75hz, connected with High Speed, ethernet HDMI cable
- Motherboard + Bios Revision
ASRock B75M
Intel Core i5 2500 3,30GHz non K
- Power Supply Unit Make, Model & Wattage
Corsair VS Series, 550W
Geil Dragon 8GB Ram
Describe your issue:
I have tried with the optional and the recommended driver, but Freesync just won't work normally. Sometimes it kicks in if I alt+tab like 3 - 6 times.
It seems that the driver doesn't like Rivatuner either, because no matter how many times I alt+tab it will not work with Rivatuners framerate cap, which is pretty necessary for my needs. I would use the FPS cap in the control panel but sometimes I get 1 lower or above fps from the limit.
I have an RX 560 connected to an Acer KG221Q 75hz monitor with an A+ high speed, ethernet HDMI cable. (The monitor indeed supports Freesync, and there is no option in the OSD or anywhere else to turn it on or off, so I can only assume it's on all the time)
Radeon Settings reports the Freesync range from 48hz to 75hz, and it is enabled in the control panel.
Other settings like Morphological Filtering or FPS capping works. I have tried many things like clean installing, deleting the drivers with DDU then reinstalling them but I didn't fix anything.
It isn't game related either, I have tried with GTA V, Skyrim SE and Dying Light with the same results. Vsync was turned off for all titles.