cancel
Showing results for 
Search instead for 
Did you mean: 

Graphics Cards

Can't get 1080i working on my Sony Bravia (2nd monitor on RX 5700 XT Red Devil)

hi!

The best resolution I can get working on my 2nd monitor (SONY Bravia KLV-S32A10E) is 720p.

When I switch to 1080i /60 in Windows, the TV screen goes completely nuts.

It was working 100% on my old Graphics Card (GTX1060), and even worked on my Raspberry Pi with Linux and Kodi, but now I have a 5700XT Red Devil and the Adrenaline Drivers just don't seem to get it working.

I tried making a custom resolution, but nothing with 1920x1080 gets accepted, although I already know that the TV can do 1080i /60 from my previous Nvidia card...

Some screenshots attached showing 720p working, and how screwed up 1080i /60 looks...

Please tell me how to get 1080i, I like the card, and don't want to sell it again and buy an RTX3070 instead...

(my 1st monitor runs at 1080p/60 and is an iiyama Blackhawk, but that doesn't really matter)

13 Replies

I downloaded Entech Monitor Asset Manager to get the EDID file in Win10 (in Debian Linux it's possible with a shell application). here's what it got:

Monitor
  Model name............... SONY TV
  Manufacturer............. Sony
  Plug and Play ID......... SNY2E00
  Serial number............ n/a
  Manufacture date......... 2005, ISO week 0
  Filter driver............ None
  -------------------------
  EDID revision............ 1.3
  Input signal type........ Digital
  Color bit depth.......... Undefined
  Display type............. RGB color
  Screen size.............. 160 x 90 mm (7.2 in)
  Power management......... Not supported
  Extension blocs.......... 1 (CEA/CTA-EXT)
  -------------------------
  DDC/CI................... Not supported

Color characteristics
  Default color space...... Non-sRGB
  Display gamma............ 2.20
  Red chromaticity......... Rx 0.640 - Ry 0.330
  Green chromaticity....... Gx 0.300 - Gy 0.600
  Blue chromaticity........ Bx 0.150 - By 0.060
  White point (default).... Wx 0.313 - Wy 0.329
  Additional descriptors... None

Timing characteristics
  Horizontal scan range.... 14-46kHz
  Vertical scan range...... 47-61Hz
  Video bandwidth.......... 80MHz
  CVT standard............. Not supported
  GTF standard............. Not supported
  Additional descriptors... None
  Preferred timing......... Yes
  Native/preferred timing.. 1920x1080i at 50Hz (16:9)
    Modeline............... "1920x1080" 74.250 1920 2448 2492 2640 1080 1084 1094 1124 interlace +hsync +vsync
  Detailed timing #1....... 720x480p at 60Hz (16:9)
    Modeline............... "720x480" 27.000 720 736 798 858 480 489 495 525 -hsync -vsync

Standard timings supported

EIA/CEA/CTA-861 Information
  Revision number.......... 3
  IT underscan............. Not supported
  Basic audio.............. Supported
  YCbCr 4:4:4.............. Supported
  YCbCr 4:2:2.............. Supported
  Native formats........... 1
  Detailed timing #1....... 1280x720p at 60Hz (16:9)
    Modeline............... "1280x720" 74.250 1280 1390 1430 1650 720 725 730 750 +hsync +vsync
  Detailed timing #2....... 720x576p at 50Hz (16:9)
    Modeline............... "720x576" 27.000 720 732 796 864 576 581 586 625 -hsync -vsync
  Detailed timing #3....... 1280x720p at 50Hz (16:9)
    Modeline............... "1280x720" 74.250 1280 1720 1760 1980 720 725 730 750 +hsync +vsync
  Detailed timing #4....... 1920x1080i at 60Hz (16:9)
    Modeline............... "1920x1080" 74.250 1920 2008 2052 2200 1080 1084 1094 1124 interlace +hsync +vsync

CE video identifiers (VICs) - timing/formats supported
    1920 x 1080i at  50Hz - HDTV (16:9, 1:1) [Native]
     720 x  480p at  60Hz - EDTV (16:9, 32:27)
    1280 x  720p at  60Hz - HDTV (16:9, 1:1)
     720 x  576p at  50Hz - EDTV (16:9, 64:45)
    1280 x  720p at  50Hz - HDTV (16:9, 1:1)
    1920 x 1080i at  60Hz - HDTV (16:9, 1:1)
     640 x  480p at  60Hz - Default (4:3, 1:1)
     720 x  480i at  60Hz - Doublescan (16:9, 32:27)
     720 x  576i at  50Hz - Doublescan (16:9, 64:45)
    NB: NTSC refresh rate = (Hz*1000)/1001

CE audio data (formats supported)
  LPCM    2-channel, 16/20/24 bit depths at 32/44/48 kHz

CE speaker allocation data
  Channel configuration.... 2.0
  Front left/right......... Yes
  Front LFE................ No
  Front center............. No
  Rear left/right.......... No
  Rear center.............. No
  Front left/right center.. No
  Rear left/right center... No
  Rear LFE................. No

CE vendor specific data (VSDB)
  IEEE registration number. 0x000C03
  CEC physical address..... 1.0.0.0
  Maximum TMDS clock....... 165MHz

Report information
  Date generated........... 2020-09-07
  Software revision........ 2.91.0.1043
  Data source.............. Real-time 0x1300
  Operating system......... 10.0.19041.2

Raw data
  00,FF,FF,FF,FF,FF,FF,00,4D,D9,00,2E,00,00,00,00,00,0F,01,03,80,10,09,78,0A,EE,91,A3,54,4C,99,26,
  0F,50,54,00,00,00,01,01,01,01,01,01,01,01,01,01,01,01,01,01,01,01,01,1D,80,D0,72,1C,16,20,10,2C,
  25,80,A0,5A,00,00,00,9E,8C,0A,D0,8A,20,E0,2D,10,10,3E,96,00,A0,5A,00,00,00,18,00,00,00,FC,00,53,
  4F,4E,59,20,54,56,0A,20,20,20,20,20,00,00,00,FD,00,2F,3D,0E,2E,08,00,0A,20,20,20,20,20,20,01,41,
  02,03,1C,71,49,94,03,04,12,13,05,01,07,16,23,09,07,07,83,01,00,00,65,03,0C,00,10,00,01,1D,00,72,
  51,D0,1E,20,6E,28,55,00,A0,5A,00,00,00,1E,8C,0A,D0,90,20,40,31,20,0C,40,55,00,A0,5A,00,00,00,18,
  01,1D,00,BC,52,D0,1E,20,B8,28,55,40,A0,5A,00,00,00,1E,01,1D,80,18,71,1C,16,20,58,2C,25,00,10,09,
  00,00,00,9E,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,14

0 Likes

Maybe the solution is, that Win10 doesn't have my SONY TV properly recognized with it's display modes, and the NVIDIA card didn't care about the Windows Display Driver data and instead addressed the TV properly, but the AMD card doesn't do that. I don't know.

I extracted the EDID data from the TV (as listed above) and even made an .inf file and installed that, but it didn't change anything. Still not working in 1080 interlaced mode with the Radeon Card.

0 Likes

From what you posted to get 1080i output your Resolution Frequency must be 50 Hz. If it is 60 Hz it will output 720 instead:

CE video identifiers (VICs) - timing/formats supported
    1920 x 1080i at  50Hz - HDTV (16:9, 1:1) [Native]
     720 x  480p at  60Hz - EDTV (16:9, 32:27)
    1280 x  720p at  60Hz - HDTV (16:9, 1:1)
     720 x  576p at  50Hz - EDTV (16:9, 64:45)
    1280 x  720p at  50Hz - HDTV (16:9, 1:1)
    1920 x 1080i at  60Hz - HDTV (16:9, 1:1)
     640 x  480p at  60Hz - Default (4:3, 1:1)
     720 x  480i at  60Hz - Doublescan (16:9, 32:27)
     720 x  576i at  50Hz - Doublescan (16:9, 64:45)
    NB: NTSC refresh rate = (Hz*1000)/1001

Go to Windows Settings - Display and see if your Monitor Frequency is set at 60 Hz instead of 50 Hz:

0 Likes

Thank you, I already tried, that, and it looked the same way distorted. also, the EDID says it can do both, 50 or 60Hz, which as I wrote I confirmed myself using a Raspberry Pi with Debian Linux, LibreELEC with Kodi and my own GTX1060 card, which all had zero problems with this old LCD TV.

1920 x 1080i at  50Hz - HDTV (16:9, 1:1) [Native]
     720 x  480p at  60Hz - EDTV (16:9, 32:27)
    1280 x  720p at  60Hz - HDTV (16:9, 1:1)
     720 x  576p at  50Hz - EDTV (16:9, 64:45)
    1280 x  720p at  50Hz - HDTV (16:9, 1:1)
    1920 x 1080i at  60Hz - HDTV (16:9, 1:1)
     640 x  480p at  60Hz - Default (4:3, 1:1)
     720 x  480i at  60Hz - Doublescan (16:9, 32:27)
     720 x  576i at  50Hz - Doublescan (16:9, 64:45)
    NB: NTSC refresh rate = (Hz*1000)/1001

0 Likes

Maybe i need a better "Displaydriver" for the monitor in Windows. I made a monitor.ini from the EDID and installed that, but that was probably not it. When i go to the Hardware Monitor, and try to update drivers from the same ini file, Windows tells me it already has the best (microsofts own) driver for it, and also it needs a monitor.sys file. Anyone know how to make such a file?

0 Likes

I have now successfully installed my own monitor.inf driver with the EDIT info from the LCD-TV. (despite that it worked flawlessly with an Nvidia card). and I still can not get 1080i to work with the 5700XT/AMD driver. So it is definitely a bug in the AMD driver... I wrote a bugreport for that, and if I dont get a helpful answer within a week, I will sell this otherwise nice gfx card again RX 5700XT Red Devil. too bad.

0 Likes

I am experiencing the same with an older Bravia TV as well. Model KDL-V26XBR1. I am using Linux. I felt compelled to reply to this thread because I can't seem to find anything else about this bug. Intel GPU is able to set to 1080i. I am using an RX 550 now and it is only presenting 1280x720 as the highest resolution.

0 Likes

it's an AMD driver bug, all you can do is hope and pray they release a better driver sometime in the Future.

good luck bro. One more thing, you can also write a bug report in the new Adrenaline driver, maybe it will motivate them to fix the issue. I did it also.

0 Likes

Yeah, it seems that interlaced resolutions aren't supported at all in Navi. Been trying to get them on my 5700xt to no avail.

I'll send a bug report as well.

0 Likes

one more thing... since you are on Linux, maybe you can fix the issue despite the bad drivers. On my Raspberry Pi I used to add some line to config.txt (might have different name/location depending on your linux distro) to get 1080i working on my SONY TV. Here's the 2 links with some info about that.

https://www.raspberrypi.org/documentation/configuration/config-txt/README.md 

https://www.raspberrypi.org/documentation/configuration/config-txt/video.md 

maybe you can get it to work, would be nice to hear of your results. cheers.

0 Likes
harest
Adept II

Same on an old Panasonic Viera HD ready. On previous gpu 4870 and 7870 it always worked fine in 1920x1080 at 50Hz. Since i've a 5700xt i can only have up to 720p. 1080i 50Hz isn't in the list of supported formats :/.

0 Likes

use CRU to set 1080i Resolution - you need the correct settings for that and enable the "interlaced" checkbox ;)

PC: R7 2700X @PBO + RX 580 4G (1500MHz/2000MHz CL16) + 32G DDR4-3200CL14 + 144hz 1ms FS P + 75hz 1ms FS
Laptop: R5 2500U @30W + RX 560X (1400MHz/1500MHz) + 16G DDR4-2400CL16 + 120Hz 3ms FS
0 Likes
harlemshake
Adept I

I have the same problem on my toshiba 30hf85c on the hdmi plug windows 11 on my 6700xt

Ryzen 5 5600x at 4.731ghz pbo off 100.125 bclk/ cooler ice giant pro syphon elite/ 64gb ddr4 team group dark Za 3600mhz cl18 single rank oc at 3741mhz cl17 1:1r/ AMD Rx6700xt asrock phantom gaming oc at 2803mhz vram oc at 2150mhz just because of the amd oc limiter/Asus rog strix b550-xe gaming wifi/1050w termaltake 80plus gold semi-modular/c drive XPG s50lite 1tb
0 Likes