I have been trying to install my s7150x2 into a HP DL380 Gen9 running VMware Exsi 6.5 for about a week now without success.
I am following these instructions..
the host drivers include 2 vib files, I'm not sure what the difference between the 2 is, but I've tried both without success.
The error I come up against when running the mxgpu-install.sh installation script is...
Detected 0 SR-IOV GPU
No SRIOV GPU found.
that appears to be telling me the s7150x2 card is not being found in the system.
I have checked in bios and SRIOV is enabled
I'm not sure what to do now, can someone offer some suggestions.
Thanks for your help
I've just realised I don't have a power cable for this.
It didn't come with a power cable and I'm having terrible trouble trying to find one online to buy.
Can someone tell me the correct part number for the power cable for use in a HP DL380 Gen9.
The server side of the cable needs to be 10 pin and the card side 6pin+8pin
For some non-AMD/ATI GPU boards for some DL380 G7s and some DL580 G7s we ordered the supposedly appropriate cables on eBay.
We ordered more than a dozen cables via eBay, some were correct, some were not.
In the end, we obtained the tools and parts to re-work the cables as needed.
You can use eBay search for: 10pin to 6+8pin GPU DL380 G9
And maybe look into Molex tools (crimpers, extractors, etc) and parts via Google.
I have the same issue. Does the AMD Firepro S7150x2 require a power cable (6+8pin) that will be attached to the PCI board (10pin)? I received a Firepro S7150x2 card but it doesn't came with the power cable. It is for an HP DL380 G9.