Hello fellow humans,
I'm not a spider and I'm at my wits end here. Around April this year, my pc started locking up. The screen would freeze with the mouse still working but unable to click on anything, music or video is still playing in the background (if I have them running) until the stuff it is reading on RAM runs out and no keyboard input would register. Sometimes the freeze would happen a minute or five after first getting passed through the log screen but I have experienced it freeze as Windows booted (twice) or just as when the log screen came up (once). The freeze would always reset custom wattman settings. Sometimes, the fan would go super Saiyan after these resets when the PC boots but then power down to base form once Win10 starts booting. Rarely would I get a freeze after a few hours of use (only happened once, and only after ten hours).
Here are the things I have tried to alleviate this with bare minimal improvement if none at all:
Although I've never had it freeze during graphics-intensive gaming, I did have it happen once while playing Stellaris, so I guess it can happen during gaming, I just wasn't unlucky enough yet. I haven't tried reinstalling the OS yet because I have a feeling this thing will freeze during install and screw me over forever.
I have a few theory as to why this is happening:
Aside from this, I have had zero problems with this card since I bought it so I really hope you guys and gals can help, thanks in advance . I am a normal human and not a spider.
GPU: Sapphire Nitro+ OC 8gb RX 480
CPU: Intel i5-2500 @ 3.30GHz
RAM: Kingston Hyper-X 8GB 1333MHz
MOBO: Asus P8H67-M LE (latest bios)
PSU: Cooler Master GX 650w Bronze (12v rail up to 52A supposedly)
OS: Windows 10 Pro build 18362.239
I have RX 480 too and my system is stable with updated operating system and latest AMD driver. I looked at the "Sapphire NITRO + RX 480 OC 8 GB" from another website. Your GPU's boost clock value is 1342 MHz. Try lowering that value with WattMan. Try to solve the problem by restarting the computer after applying the WattMan settings.
In addition, the weather is warming up after April.
Your processor may require thermal paste replacement.
Your operating system may require a clean installation.
Looking at the problems you've written and the solutions you've tried, there seems to be heating problem with your CPU or PSU.
I did something and enough time has passed that I can confidently report that I may have fixed the problem permanently. Before I went up and requisitioned new parts from the mothership, I decided to check the inside thoroughly and replace the SATA or power cable that may have deteriorated. Nothing was wrong with the cables since I still use them to this day. I do think a small bunch of dust has managed to cross some lines somewhere though because I haven't had a problem since when I cleaned the motherboard and GPU board with compressed air. In my decades of using and maintaining a cross-dimensional portal relay computer, this is the first time I had this happen so I learned something new at least. I searched online and found out that dust is overwhelmingly made up of dead human skin flakes. In time that will no longer be a problem, as it will rectify itself eventually once I'm done here, I'm sure. hehehehe
So there's that. Happy ending for all! Good luck to any of you that may encounter the same problem as I had and I hope the fix was just as cheap and easy.