I have RX 5700 XT, latest driver (20.1.1), and a LG Ultragear 27GL650F-B. The monitor is Freesync supported, you can check on their website: https://www.lg.com/us/monitors/lg-27gl650f-b
However, my AMD Raedon Software is not able to detect the Freesync, and I cannot turn it on on the software. I have Freesync enable on my monitor. I will attach below are screenshot so you guys can see. Thank you.
You don't mention how you have the monitor cabled to the GPU? HDMI? Display port? Have you tried changing the cable to eliminate a cable issue? Personally, I would avoid the cheap-oh cables from places like Wal-Mart. Have you tried a different input on the display?
Hello, i plugged in a Display port from the monitor to the graphic card. The display port is 1.4 version or higher straight from where I purchased the monitor. Any suggestion I should do?
Is there any possibility of trying another GPU to see if the display works properly? The thing is to isolate the issue to either the display or the GPU. Without having anything that can send a FreeSync signal to the display and have the display work properly, it is difficult if not impossible to exclude the display as the culprit.
In the original post, in the second paragraph, the poster says he has FreeSync enabled on the monitor.
my panel has 2 settings, i selected the advanced one and it works fine
Any fix yet? Mine is doing the same thing. I can't seem to enable freesync through DP, only HDMI, and still through HDMI it has issues as to where I get screen tears and crashes while gaming.
Great Monitor, one caveat
If you want to use the The AMD FreeSync mode, it has to be turned on in the monitor’s OSD (On Screen Display), described in the manual, (LG's OWNER’S MANUAL LED LCD MONITOR (LED Monitor*)) on page 10