AnsweredAssumed Answered

Libre Hardware Monitor is a fork of Open Hardware Monitor and offers some extra functionality

Question asked by kingfish on Aug 30, 2020
Latest reply on Sep 10, 2020 by pokester

Last year, when I reviewed Sidebar Diagnostics, I mentioned that it uses a module from Libre Hardware Monitor for reading Ryzen CPU sensors.

Libre Hardware Monitor is a fork of Open Hardware Monitor and offers some extra functionality

Libre Hardware Monitor is a fork of Open Hardware Monitor. The program's project appears to have started when the development of Open Hardware Monitor seemed to have stalled. The latter has received a few updates recently, after a gap of nearly 4 years. If you haven't used either program, these are real-time system monitoring applications that you can use to observe/log the system's CPU load, Bus Speed, temperature levels. It can be a useful utility to have when you're running intensive games, virtual machines editing videos,, etc., and want to see if the computer could be overheating.

For the most part, Libre Hardware Monitor is quite similar to the original. The icon and the interface are the same. You can use them side-by-side. Scroll down the interface of LHM, and you will notice some minor differences. Libre Hardware Monitor displays some additional information, most notably, the Temperature readings of the CPU. Open Hardware Monitor shows the current and max temperature values of the CPU Core and CPU Package. But LHM also displays the CPU Core Distance to TjMax, the Core Max and Core Average values.

 

 

Libre Hardware Monitor vs Open Hardware Monitor CPU

Note: For those unaware, Distance to TjMax is the maximum temperature the CPU has been rated for, when it will be throttled to prevent overheating.

This reading displays the number of degrees for the CPU to reach TjMax, i.e. the difference between the current temperature and the maximum it can reach. For e.g. If your CPU is rated for 105°C, and the current temperature is 55°, the Distance to TjMax would be 105 - 55, which is 50° C.

That's a total of four extra monitors which Libre Hardware Monitor has so far, and there's more. In the memory section, the program has two extra modules, to read the amount of virtual memory that is being used and the available (remaining) in terms of GB.

 

Libre Hardware Monitor vs Open Hardware Monitor virtual memory

Moving on to the hard drive monitors in the application, in addition to the used space value, LHM also displays the write activity, total activity (both in %), read rate and write rate (in MB/s).

 

Download note: (Avoid clickbait..scroll to bottom of download page) > Libre Hardware Monitor - Download 

 

 

 

Libre Hardware Monitor vs Open Hardware Monitor hard drive

Outcomes