AnsweredAssumed Answered

Radeon 530 causes page fault in non paged area error while installation(atikmdag.sys)

Question asked by ijasir on Jun 4, 2020
Latest reply on Jun 6, 2020 by mohamed-nabil

After a sudden crash (BSoD) during gaming srttrail.txt error was shown and then I clean Installed Windows 10 using a windows media creation tool and then updated Lenovo recommended drivers(Lenovo ideapad 320). My intel 620 GPU is successfully installed and running while AMD is throwing atikmdag.sys error while display driver installation.

 

And in device manager the device was shown as Video Controller with a hazard logo after many failed attempts to installation I booted in safe mode and from device manager browsed for updates in pc and updated the driver but my laptop won't restart. Shows black screen and goes to Automatic repair and diagnosis and after the loop being failed it again shows srttrail error.

 

Back in safe mode after disabling the device I am able to boot back normally. But when enabled the system crashes(BSoD) with error: Page_fault_in_nonpaged_area and atikmdag.sys is also mentioned. (And as above the automatic repair loop also starts)

 

I tried this with the latest Windows 10 and also windows 10 19h1(November Update). I tried updating using amd autodetect and also by downloading the latest driver from amd by selecting device. And these installation softwares don't detect the device in safe mode. I also tried clean installation with DDU and amd cleanup utility. 

 

Rightnow the driver is installed while I was in safe mode, neither can I use the device nor open AMD Radeon Setting App, What can be done now? I'm out of options also, I've cleaned my RAM(as I've read page fault is caused due to ram/hdd), did sfc /scannow(no integrity violations) 

 

I would really appreciate a help,

Thanks

Outcomes