AnsweredAssumed Answered

Radeon Software Adrenalin 2020 Edition 20.4.2

Question asked by jazzyanne on May 24, 2020
Latest reply on Jun 5, 2020 by jazzyanne

I've been to product support but the answers bordered on ridiculous such as, I quote,  "I would suggest you to perform the clean installation of OS". I installed three RX560 cards on three different PC's and the software does the same thing. You create a profile and when Windows boots up, the profiles not there, it defaults back to original install. So, the profile will not hold. 

Example; I created a preset/profile which has the fan coming on at a lower temperature with Zero RPM switched of. Advanced control is enabled with some small Fine Tuning Control tweaks. All works while the app is opened and the fan runs at the RPM that I want. When the PC is rebooted, the profile gas reverted back to default. This happens to all three PC's the card is installed using the latest version of Adrenalin 2020 Edition 20.4.2. Also, sometimes the screen will flash and there will be two or three instances of the app in the taskbar, for a few seconds, then lavel out to the one instance I put there. The cards work fine but the software is buggy. Any thoughts? Thanks

 

XFX Radeon FX560P4SFG5

Desktop Windows Pro x64

Adrenalin 2020 Edition 20.4.2

Asus and HP 32in monitors, 1920x1080 HDMI

Asrock 970A-G/3.1 version 1.20

FX8350

Cooler Master 600watt PWR Supply

32G ram

Outcomes