AnsweredAssumed Answered

3950X Stability

Question asked by amarrotti on Feb 12, 2020
Latest reply on Jul 18, 2020 by misterj

I just recently built a pc with a Gigabyte Aorus Ultra X570 and a 3950X. It runs fine except when I run prime95 small fft or occt small data set it will instantly stop workers or BSOD. The pc is at default setting no overclock. From troubleshooting the only thing I can do to get it to run prime95 small fft or occt small data set is if I make one change in the bios and that is changing Load Line Calibration from auto to medium. I am mainly trying to find out if anyone else has this issue if the cpu or motherboard my be faulty I'm leaning towards swapping out the motherboard or if this might be something fixed in a bios update. Any help would be greatly appreciated.

Outcomes