Dsn'avinci Resolve 14 doet recognize my Sapphie RX 570 ITX, said no OpenCL capable Hardware found. Latest driver.
Great, I guess that means the Da Vinci Resolve 14 was not compatible with the latest AMD Driver.
Please mark your last reply as "Correct" so other Users that has similar issue with Da Vinci will see what fixed your problem.
Typo: Davinci Resolve 14
Download and run GPU-Z and see if OpenCL is checked marked at the bottom. If it isn't, then you need to update or install the AMD Driver again.
Latest RX 570 AMD Driver: https://www.amd.com/en/support/graphics/radeon-500-series/radeon-rx-500-series/radeon-rx-570
Make sure your Windows is completely updated via Windows Update.
Use DDU in Safe Mode with the internet disconnected and deleting AMD Folder, if applicable, in the Root Directory C:\AMD. After rebooting back into Windows Desktop, still with internet disconnected, run the Full AMD Driver package you downloaded and if it installs correctly, again delete C:\AMD folder and reconnect the Internet.
Now check GPU-Z and see if OpenCL is checked marked.
Will do that, thank you
OpenCL is checked
If OpenCL is checked marked that means that OpenCL is enabled on your GPU card and should be working. Possibly try a previous AMD Driver and see if Da Vinci OpenCL is recognized.
Found this thread from Da Vinci Creators forum:Blackmagic Forum • View topic - No OpenCL GPU found
Another BlackMagic Forum thread: Blackmagic Forum • View topic - From "GPU memory full" to "No OpenCL"
Here is the latest AMD Driver for the RX 570:https://www.amd.com/en/support/graphics/radeon-500-series/radeon-rx-500-series/radeon-rx-570
Here is are the previous (about 6 months worth) of AMD Drivers: https://www.amd.com/en/support/previous-drivers/graphics/radeon-500-series/radeon-rx-500-series/radeon-rx-570
Just installed Resolve 16 and everything works fine. Thank you.
Retrieving data ...