Ryzen 9 3900x CPU
Noctua NH-D15 Chromax Cooler
Aorus Ultra x570 ATX Motherboard HW Rev 1.0 UEFI F11
AsRock Radeon 5700 XT video card reference model
G.Skill Ripjaws DDR4 3200Mhz 32G (2x16G)
Samsung 970 EVO NVMe 1TB
Crucial P1 NVMe 1TB
Corsair AX860 860W fully modular Plus Platinum ATX power supply
Corsair Carbide 275R ATX Case
Windows 10 Pro, build 1909
LG 32GK650F-B 32" 16:9 QHD LCD Gaming Monitor
Graphics Settings, 2560x1440 in either 8bpp or 10bpp, Freesync on, 144hz Refresh, 1ms Motion Blur OFF, Black Stabilizer at 25, response time set to NORMAL. These settings worked for the prior version of the Radeon 19.11 series of drivers with this Monitor and video card with one minor glitch over certain bodies of water in World of Warplanes, where blt type squares presented on some of the near shore water.
AMD Radeon Win10-Radeon-Software-Adrenalin-2020-Edition-19.12.2-Dec12
Installed clean, rebooted. Uninstalled, rebooted, used amdcleanuputility, rebooted, installed, rebooted.
Attempted to roll back driver by installing from the Radeon-Software-Adrenalin-2019-19.11.3-MinimalSetup-191118_64bit driver which thwarted every attempt. Either that driver detected that a newer one was available and began downloading it, or it refused to install when NOT connected to the Internet. (might want to rethink forced updates? and required access to Internet for driver installs?)
Steps to reproduce:
1) Open and log into World of Warplanes
2) Fly normally.
3) Look at flames on scenery or aircraft being shot down.
Results: Varied graphical issues from wind turbulence indicators turning dark black to flames being blue instead of red or fire like, bullet tracers being black or blue instead of red, etc. See attached screen shot. Those oil wells are supposed to be on fire and the flames instead of the blue like inked results.
System temps well within accepted norms
CPU 50C Max
VRM 45C Max
Samsung NVMe 43C
Crucial NVMe 39C