I'm having a lot of stability problems since I put this graph and updated windows to version 1903.
Is this hardware compatible with this version of windows?
I've tried several versions of Adrenaline and the latest crimson.
Thank's.
I'm having a lot of stability problems since I put this graph and updated windows to version 1903.
Is this hardware compatible with this version of windows?
I've tried several versions of Adrenaline and the latest crimson.
Thank's.
I have changed the power supply for a new and something more powerful and already works well.
Anyway, the program hwinfo from time to time gets graph voltage readings that reach 1,350V.
Hi, I have another question with similar hardware.
GigaByte_GA-F2A88X-D3H_(rev._3.0) + X4 760K + GigaBite R9 270X = many year without problems
GigaByte_GA-F2A88X-D3H_(rev._3.0) + X4 760K + Sapphire Nitro RX470+ = black screen at Bios boot
GigaByte_GA-F2A88X-D3H_(rev._3.0) + X4 760K + Sapphire Nitro RX580+ = black screen at Bios boot
By below link it should work, by user japweb looks that it works..
https://www.pc-specs.com/mobo/GigaByte/GigaByte_GA-F2A88X-D3H_(rev._3.0)/2452
Is it possible that with newer CPU is support new graphic card or newer Bios will support GPU?
X4 760K (FM2)
https://www.amd.com/en/products/cpu/760k
X4 860K (FM2+)
https://www.amd.com/en/products/cpu/860k
Current board Bios is F5 (last F7 support Godavari and Carrizo), I will update it ASAP (but I´m worry that it will be unnecessary work)
GA-F2A88X-D3H (rev. 3.0) | Motherboard - GIGABYTE Global
Board specification with note..
* For optimum performance, if only one PCI Express graphics card is to be installed, be sure to install it in the PCIEX16 slot.
(The PCIEX16 slot conforms to PCI Express 3.0 standard.)
* To support PCI Express 3.0, you must install an FM2+ APU.
I know that CPU and Board are too old, but I´m waiting with upgrade (new CPU+MB+RAM) for some new Ryzen CPU.
All these card works with R5 1600 (second PC)
Thank you for your notes
Jiri
I have changed the power supply for a new and something more powerful and already works well.
Anyway, the program hwinfo from time to time gets graph voltage readings that reach 1,350V.