We are using Intel Kaby Lake Xeon Processor card and E8860 graphics card as primary display. The OS used is RHEL-7.5.
We are facing reset issue on the system level, when a reset is issued on Intel Kaby Lake Xeon Processor, the system is not rebooting. It needs to be powered off, only then the system is getting out of the reset state.
On the other side, when only Intel Kaby Lake Xeon Processor is used in the system, reboot of the system is happening successfully.
Kindly suggest any particular setting are available on 8860 so that Reboot can be done in this processor and graphics combination.