convolutionxx

RX 570 + Foxconn H61MX = No Post/Black Screen

Discussion created by convolutionxx on Mar 13, 2019
Latest reply on Mar 14, 2019 by convolutionxx

Used a gtx 670 before, and it was fine. Uninstalled all Nvidia drivers, plugged in rx 570 (msi armour 8gb oc edition), no post beep, black screen. Plug monitor in integrated graphics connector, went in and enabled safe mode plus disable Intel HD 4000 graphics. Shut down comp. Plug in rx 570. Black screen no post. Set the graphic adapter in bios to PEG. No luck. Reset cmos, by jumper and by battery removal. No luck. If you can help that would be wonderful. 

 

Yes I remembered to plug in 8 pin power connector. Tried both sets (Psu = corsair cx500). Fan runs on video card, but computer won't detect it plugged in. 

 

Help? Eternal appreciation. 

 

Win 10 x64 build 1803

 

Lastly, if I wipe windows and reinstall a new version, would it help at all? 

 

Also, according to http://www.pc-specs.com/gpu/ATI/R-500_Series/Radeon_RX_570_8GB/3878/Compatible_Motherboards

 

My Mobo should have support for this video card... it's bios is revision 4.0

 

I think my motherboard has the option for UEFI because I can choose "UEFI" as the initial boot device, followed by my SSD as the 2nd. 

Outcomes