Fans do not stop in manual control mode

Discussion created by vialli762 on Jan 15, 2019
Latest reply on Jan 17, 2019 by pvcdroid

I noticed that the automatic control of the temperature / speed ratio of the fans has not been performed correctly, causing the plate to become too hot. When a manual control (by the Adrenalin chart) is done, everything is resolved, however, the driver does not allow me to select an acceptable level of temperature where the fans do not need to rotate. Being clearer, the driver makes it impossible for me to leave the idle fans below 45 degrees. Sometimes my board is idle at 30 degrees and the fans continue to spin.


In automatic mode the fans stop at low temperature, but do not efficiently generate the rotation, causing the component to warm up during games.


In manual mode, overheating is resolved, but the driver prevents fans from spinning to less than 35% in any temperature condition, even if the card is completely cold.


AMD, we need to allow control of the rotation in 0% of the fans in manual mode.


Versão do software Radeon - 19.1.1

Edição do software Radeon - Adrenalin 2019

Chipset gráfico - Radeon RX 570 Series

Tamanho da Memória - 4096 MB

Tipo de memória - GDDR5

Clock interno - 1256 MHz

Versão do Windows - Windows 10 (64 bit)

Memória do sistema - 8 GB

Tipo da CPU - Intel(R) Core(TM) i5-2310 CPU @ 2.90GHz