!Assembled a computer from new hardware, installed Windows 10 Pro. Already updated the motherboard BIOS to the latest available version 7B38v1C. There is a problem installing drivers for the graphics card built into the processor. It is shown on any versions of drivers from the MSI and AMD site, including from a disk in a set. During installation, an error (1603) crashes, while the video card appears in the Manager, but after restarting there is no signal on the monitor, you have to roll back the operating system.
Reinstalled operating system on Windosw 10 pro 1709, in BIOS established Initiate Grafic Adapter in IGD, drivers Radeon 18.10.1 were established. The signal on the monitor is issued only by VGA. Connected the second monitor via DVI, after loading the operating system on this monitor several times there is a picture, and then writes no signal