Constantly having to switch updates

Try disabling Fast start up then re-clean install the driver of your choice:

(Remember to reboot after disabling fast start)

How to Enable or Disable Fast Startup

Deciding whether to bother with Fast Startup actually takes longer than turning it on or off. First, open up your power options by hitting Windows+X or right-clicking your Start menu and selecting Power Options. In the Power Options window, click “Choose what the power buttons do.”

If this is the first time you’ve messed with these settings, you’ll need click “Change settings that are currently unavailable” to make the Fast Startup option available for configuration.

Scroll to the bottom of the window and you should see “Turn on fast startup (recommended),” along with other shutdown settings. Just use the check box to enable or disable Fast Startup. Save your changes and reboot your system to test it out.

If you don’t see the option at all, it means hibernation is not enabled on your machine. In this case, the only shutdown options you’ll see are Sleep and Lock. The quickest way to enable hibernation is to close the power settings window and then hit Windows+X and open Command Prompt (Admin). At the Command Prompt, type the command:

powercfg /hibernate on

After turning hibernate on, run through the steps again and you should see both the Hibernate and Fast Startup options.

Windows 10 Fast Startup could be detrimental to your computer