1 Reply Latest reply on Oct 15, 2018 7:36 PM by giorov92

    AMD 470 chipset won't get past StoreMI screen at boot after plugging in USB3 card reader into motherboard internal slot

    giorov92

      AMD 470 chipset won't get past StoreMI screen at boot after plugging in USB3 card reader into motherboard internal slot.

       

      It's a StarTech USB3.0 multi-card reader I got from Newegg which connect to an onboard connector.

       

      I'm on a Gigabyte X470 AORUS ULTRA GAMING (rev. 1.0) AM4 chipset with StoreMI managing and SSD-HDD combination partition.

       

      Computer boots fine unless I plug in the USB3 onboard pin connector for the card reader.

       

      What can I do? I'm thinking maybe there's some USb3 setting for internal headers which I could find hidden somewhere. Or at the very worst, decouple the two drives, turning off StoreMI, plugging it in, seeing if it boots to windows then try remaking the connection.. although really that's a lot of trouble. Sounds like StoreMI is confused by the card reader, thinking there are a bunch of other potential drives... maybe something to do with drive letters? Don't think so though.

       

      Thanks,

       

      Gio