Make sure you have minimum BIOS version F2 installed on your Motherboard to make the Ryzen 2700x work. X470 AORUS GAMING 7 WIFI (rev. 1.0) | Motherboard - GIGABYTE Global
AMD Ryzen 7 2700X 8C/16T 3.7GHz / 4.35GHz 4MB 16MB N/A Pinnacle Ridge 12nm B2 105W F2
The latest BIOS for your motherboard is this one:
Also make sure your RAM MEMORY is listed in the Motherboard's QVL list. Ryzen are very picky about the RAM Memory that is installed: X470 AORUS GAMING 7 WIFI (rev. 1.0) | Motherboard - GIGABYTE Global . Download the Pinnacle Ridge Memory list.
Also you want to install the latest AMD Chipset from your Motherboard's Support:
Does the damage appear to be where a CPU Pin is located underneath? Do you see if any traces have been damaged using a magnifying glass?
These are all the Motherboard's Error Codes from Gigabyte concerning your Motherboard from the Manual:
3-3 Debug LED Codes Code Description
10 PEI Core is started.
11 Pre-memory CPU initialization is started.
15 Pre-memory North-Bridge initialization is started
19 Pre-memory South-Bridge initialization is started.
2B~2F Memory initialization.
31 Memory installed.
32~36 CPU PEI initialization.
37~3A IOH PEI initialization.
3B~3E PCH PEI initialization.
60 DXE Core is started.
61 NVRAM initialization.
62 Installation of the PCH runtime services.
63~67 CPU DXE initialization is started.
68 PCI host bridge initialization is started.
69 IOH DXE initialization.
6A IOH SMM initialization.
6B~6F Reserved. 70 PCH DXE initialization.
71 PCH SMM initialization.
72 PCH devices initialization.
73~77 PCH DXE initialization (PCH module specific).
78 ACPI Core initialization.
79 CSM initialization is started.
7A~7F Reserved for AMI use.
80~8F Reserved for OEM use (OEM DXE initialization codes).
90 Phase transfer to BDS (Boot Device Selection) from DXE.
91 Issue event to connect drivers.
Regular Boot -
43 - Code Description
92 PCI Bus initialization is started.
93 PCI Bus hot plug initialization.
94 PCI Bus enumeration for detecting how many resources are requested.
95 Check PCI device requested resources Code Description
B4 USB device hot plug-in.
B5 PCI device hot plug.
B6 Clean-up of NVRAM.
B7 Reconfigure NVRAM settings.
S3 Resume Code Description
E0 S3 Resume is started (called from DXE IPL).
E1 Fill boot script data for S3 resume.
E2 Initializes VGA for S3 resume.
E3 OS S3 wake vector call.
F0 Recovery mode will be triggered due to invalid firmware volume detection.
F1 Recovery mode will be triggered by user decision.
F2 Recovery is started. F3 Recovery firmware image is found.
F4 Recovery firmware image is loaded.
F5~F7 Reserved for future AMI progress codes. Recovery Code Description
50~55 Memory initialization error occurs.
56 Invalid CPU type or speed.
57 CPU mismatch.
58 CPU self test failed or possible CPU cache error.
59 CPU micro-code is not found or micro-code update is failed.
5A Internal CPU error.
5B Reset PPI is failed.
D0 CPU initialization error.
D1 IOH initialization error. Error - 45 - Code Description
D2 PCH initialization error. D3 Some of the Architectural Protocols are not available.
D4 PCI resource allocation error. Out of Resources.
D5 No Space for Legacy Option ROM initialization.
D6 No Console Output Devices are found.
D7 No Console Input Devices are found.
D8 It is an invalid password.
D9~DA Can't load Boot Option.
DB Flash update is failed.
DC Reset protocol is failed.
E8 S3 resume is failed.
E9 S3 Resume PPI is not found.
EA S3 Resume Boot Script is invalid.
EB S3 OS Wake call is failed.
F8 Recovery PPI is invalid. Recovery capsule is not found.
FA Invalid recovery capsule.
This thread the E8 error was solved by installing the RAM Memory in different slots: Rampage III Black Edition ERROR Codes E8, 01, 62 - Overclock.net - An Overclocking Community .
Another thread was solved due to User not connecting something correctly on the Motherboard. MSI X299 PLUS E0 error - [Solved] - Motherboards - Tom's Hardware
Here is the ATTACHED PDF MANUAL for your motherboard while I copied the above information:
first of all thank you very much for your reply
isn't the x470 bios supports 2700x by default ? .. anyway even if i wanted to upgrade bios i can't ,,, it doesent show any options and does not boot or even shows anything ... the screen is black as if it's not connected at all ... even the keyboard dosen't power up
is there anyway to upgrade bios without starting the PC or bios ?
i also tried CMOS reset ..
i did try to connect the ram on other slots it didn't work
i'm sure everything is connected right ... i tried with the cpu 8pins and motherboard power only connected ... same E8 error
the damage on the edge ... i don't see that it's on trace or above pin
here are some close ups for it
Hi @hossamshawki I am also getting this same issue on a new build, same CPU, same motherboard.
before that it kept giving 00 error with the cpu debug led on
Can you tell me how you got past this issue?
i'm not sure how ,,, i just kept trying removing and reinstalling the cpu ,, also made sure all pins are straight with a knife ... and it passed the 00 error
Finally i get it work ,,, i took the motherboard and CPU to the store ,, they tried with 1700x CPU and it didn't work ,, tried with amd 1200 and also didn't work ,,, then they tried with Ryzen™ 5 2400G APU and it DID WORK on it's built in GPU ,,, then Updated Bios with it ,, and then tried the Ryzen 7 2700x and it worked with the updated Bios
we don't know what caused the problem ,, but that fixed it and now works fine