0 Replies Latest reply on Apr 2, 2018 2:59 AM by lightingmaster

    On a four monitor system, eyefinity won't discard the fourth monitor

    lightingmaster

      Describe your system:

      AMD Graphics Card

      • Asus RX 480 Strix O8G
      • Desktop
      • Win7 64
      • Driver version: 18.3.4
      • Display Devices
        • 3x BenQ 1920x1200
        • 1x Dell P2314H 1920x1080
      • Asus Maximus III Formula
      • Intel i7-920 D0 stepping
      • Corsair HX1000
      • 24gb Corsair DDR3

       

      Describe your issue:

      I have four monitors attached to my system. Trying to create an 3x1 Eyefinity setup with my three 1920x1200 monitors.

       

      After trying (and failing) through the Radeon software to designate only the monitors I wanted to use for Eyefinity, I went into the Win7 display settings and disabled my Dell 1080p monitor. That left me with only my 3 BenQ's, so I thought I would have no problem creating a 3x1 desktop. NOPE!

      Even though I had disabled the Dell, IT CAME BACK ON AS PART OF THE GROUP!

      Only after I PHYSICALLY DETACHED my Dell from the vid card would a 3x1 Eyefinity setup work.

       

      There has to be some better way to enable a three-monitor Eyefinity setup on a four-monitor system than pulling the data line to the fourth monitor. Does anyone have any ideas on what that better way is?

      Is there no way for the Radeon software to disable the last monitor when creating the 3x1 setup? Even if I did it manually, is there no way to keep the disabled monitor out of the setup?

       

      I appreciate any help you can give.