Good afternoon everyone,
Win10 x64 1709 (16299.251)
Installed chipset driver: 18.10.b
Display Device: lg w2363d @ 120Hz
Motherboard: GA-AB350M-D3H rev 1.0 with Bios F20 (AGESA: PinnaclePI-AM4 184.108.40.206a)
CPU: AMD Ryzen R5 1600
Power Supply: Corsair TX 850
RAM: 8gb (2x4Gb) HyperX KHX2400C15D4/4G
The problem that happened was as follows:
After updating the raid driver AMD RAIDXpert Utility 220.127.116.11 my raid 0 disappeared from the operating system.
Immediately I went to look in the BIOS and everything was normal. Array being displayed perfectly in the RaidExpert section.
The Array RAID 0 consists of two HD 500Gb Sata 3 and the two are ok.
The arrangement consists of two HD 500Gb Sata 3 and the two are ok.