0 Replies Latest reply on Feb 27, 2018 12:24 AM by martinm

    R9 200 series not letting me use my 3rd monitor on W10.


      AMD R9 290




      W10 64b


      Adrenalin 18.2.3 (updated it today after deleting the previous one completely)


      The 1st monitor is a Samsung C32F391 running at 1080p 60hz through HDMI to HDMI

      The 2nd one is a Gateway HD2201 running at 1050p 60hz through HDMI to DVI with an active adapter

      The 3rd is an I-INC Hanns.G iH232 running at 1080p HDMI to DVI-I with an active adapter


      Gigabyte GA-Z77X-D3H rev 1.1 AM inc. F18i 1/6/2014


      Intel(R) Core(TM) i5-2500K CPU @ 3.30GHz, 3701 Mhz, 4 Core(s), 4 Logical Processor(s)


      Corsair TX650W Gold


      16GB DDR3


      When I try to extend the 3rd display it shows this message: nBfgE6Q.png


      Now here is where it gets interesting; it works perfectly when I run Linux, I don't even have to set up anything as soon as I installed my distro and installed the drivers from AMD it worked like a charm. So why does it not work in the most widely used OS in the entire world?