AnsweredAssumed Answered

[HELP] CPU/HT reference is rising uncontrollably (FX-6300+M5A78L-M USB3/PLUS)

Question asked by bhangbr on Feb 17, 2018
Latest reply on Feb 17, 2018 by bhangbr

Greetings

 

After burning two MoBo and almost burning two others, I discovered what was happening with my PC. the CPU/HT reference is rising uncontrollably. Are peaks of 2~10 seconds. this is normal? Because I have a lot of instability during use and as I already said, two MoBo were killed

 

In the BIOS the CPU/HT reference is manually set to 200Mhz. I already configured all possible clock and multipliers (RAM clock, HT multiplier, CPU multiplier, NB/CPU clock) to the default or the minimum and even then the elevation continues to occur

 

Can anybody tell me what's going on?

 

I currently have an M5A78L-M USB3 / PLUS and an M5A88-M. I used a Phenom II X4 B55 and FX-6300 and the clock also went off. I have screenshot but I do not know where it is

 

Other hardware used:

2x4 Corsair DDR3 1333mhz

2x8 Hyperx DDR3 1600mhz

PSU: EVGA 450W B1

         Corsair CX600V2

 

TY!!

 

unknown[1].png5a711a3e37e7e_19kOC.png.bf8dee5defda2e97ca9701b14ce2debf[1].png

Outcomes