AnsweredAssumed Answered

Kingdom Come: Deliverance - Crossfire? AFR friendly works

Question asked by supervargen on Feb 15, 2018
Latest reply on Feb 27, 2018 by brutalix

Like • Show 0 Likes0
Comment • 11

Hello.

Will there be a crossfire profile for the game Kingdom Come: Deliverance??

I tried the crossfire settings in Radeon setting and found that AFR Friendly works great so far. The other settings are worse than CF off.
I get more than double FPS with AFR Friendly then i do with all the others and CF off.

A strange thing i noted was that with borderless window i get more fps than i do with a singel card in fullscreen.

I have R9 290 X2 and use ReLive 17.10.3 (All newer drivers breaks my win 10)

How does it work for you??

Btw.. good tips: Kingdom Come: Deliverance - PCGamingWiki PCGW - bugs, fixes, crashes, mods, guides and improvements for every PC game

1 person has this question

Outcomes

placebo Feb 17, 2018 11:31 AM

Crossfire performance in this game is horrific, every crossfire mode besides AFR has negative scaling, including the "official" AMD profile, AFR as you say has the best FPS but at most it's a 10% increase over a single card and it has bad flickering and the FPS is not stable at all.

Regarding borderless window mode, hate to break it to you but that uses a single card so the reason you're seeing better performance is because you're not using crossfire any more (back to the horrific crossfire performance I mentioned).

Actions

supervargen @ placebo on Feb 17, 2018 12:43 PM

That's what i said. " i get more fps than i do with a singel card in fullscreen." Singel card= No CF.

I get a fantastic increase of fps.

But as you say, not always stable fps. I notis that now.

But sometimes it works great.

Strange this behavior.

Actions

locodicegr Feb 17, 2018 6:43 AM

Ask game developers in the link below to support CF.

Yes, We Do Have SLI Support! :0) :: Kingdom Come: Deliverance General Discussions

1 person found this helpful

Actions

placebo @ locodicegr on Feb 18, 2018 2:56 AM

I did already two days ago.

1 person found this helpful

Actions

amdmatt

Feb 19, 2018 8:41 AM

I'll pass on interest to driver engineering.

You could try using the Crysis 3 CrossFire profile as its from the same game engine.

1 person found this helpful

Actions

placebo @ amdmatt on Feb 19, 2018 8:52 AM

Already tried it, negative scaling, as with every other profile option, except AFR but that's barely 10% improvement and has a number of visual issues rendering it unusable.

To be honest the main thing I find confusing, why do AMD drivers have an official Crossfire profile for this game that doesn't work? Was it not tested?

1 person found this helpful

Actions

supervargen @ amdmatt on Feb 19, 2018 9:04 AM

Thanks.

Please pass on all feedback on negative scaling and other strange behavior we have now.

Btw.. is it possible to bring back importing crossfire profiles?
I (and others) can't use the newest drivers, they brake win 10 completely.

Would be nice to be able to download and import just profiles for CF

Actions

placebo @ supervargen on Feb 19, 2018 10:14 AM

FWIW I'm using Windows 10 64Bit and the newest drivers with no issues, except for annoying freezes when switching between computing/gaming (I mine Monero when not gaming).

Actions

supervargen @ placebo on Feb 19, 2018 10:18 AM

That's great. Happy that you don't have our problems.

Actions

placebo Feb 24, 2018 7:08 AM

Trying the new AMD Radeon 18.2.3 drivers with the Kingdom Come Deliverance crossfire profile and the performance seems better than the previous drivers.

Anyone else notice similar?

Actions

brutalix @ placebo on Feb 27, 2018 5:03 AM

Didn't notice much difference when using crossfire with two fury x cards.

Kind regards.

Actions

11 Replies

placebo Feb 17, 2018 11:31 AM
Mark Correct
Correct Answer
Crossfire performance in this game is horrific, every crossfire mode besides AFR has negative scaling, including the "official" AMD profile, AFR as you say has the best FPS but at most it's a 10% increase over a single card and it has bad flickering and the FPS is not stable at all.

Regarding borderless window mode, hate to break it to you but that uses a single card so the reason you're seeing better performance is because you're not using crossfire any more (back to the horrific crossfire performance I mentioned).
Like • Show 0 Likes0
Actions
- supervargen @ placebo on Feb 17, 2018 12:43 PM
  Mark Correct
  Correct Answer
  That's what i said. " i get more fps than i do with a singel card in fullscreen." Singel card= No CF.
  
  I get a fantastic increase of fps.
  But as you say, not always stable fps. I notis that now.
  But sometimes it works great.
  
  Strange this behavior.
  Like • Show 0 Likes0
  Actions
locodicegr Feb 17, 2018 6:43 AM
Mark Correct
Correct Answer
Ask game developers in the link below to support CF.

Yes, We Do Have SLI Support! :0) :: Kingdom Come: Deliverance General Discussions
1 person found this helpful
Like • Show 1 Like1
Actions
- placebo @ locodicegr on Feb 18, 2018 2:56 AM
  Mark Correct
  Correct Answer
  I did already two days ago.
  1 person found this helpful
  Like • Show 1 Like1
  Actions
amdmatt Feb 19, 2018 8:41 AM
Mark Correct
Correct Answer
I'll pass on interest to driver engineering.

You could try using the Crysis 3 CrossFire profile as its from the same game engine.
1 person found this helpful
Like • Show 1 Like1
Actions
- placebo @ amdmatt on Feb 19, 2018 8:52 AM
  Mark Correct
  Correct Answer
  Already tried it, negative scaling, as with every other profile option, except AFR but that's barely 10% improvement and has a number of visual issues rendering it unusable.
  
  To be honest the main thing I find confusing, why do AMD drivers have an official Crossfire profile for this game that doesn't work? Was it not tested?
  1 person found this helpful
  Like • Show 1 Like1
  Actions
- supervargen @ amdmatt on Feb 19, 2018 9:04 AM
  Mark Correct
  Correct Answer
  Thanks.
  
  Please pass on all feedback on negative scaling and other strange behavior we have now.
  
  Btw.. is it possible to bring back importing crossfire profiles?
  I (and others) can't use the newest drivers, they brake win 10 completely.
  Would be nice to be able to download and import just profiles for CF
  Like • Show 0 Likes0
  Actions
  - placebo @ supervargen on Feb 19, 2018 10:14 AM
    Mark Correct
    Correct Answer
    FWIW I'm using Windows 10 64Bit and the newest drivers with no issues, except for annoying freezes when switching between computing/gaming (I mine Monero when not gaming).
    Like • Show 0 Likes0
    Actions
    - supervargen @ placebo on Feb 19, 2018 10:18 AM
      Mark Correct
      Correct Answer
      That's great. Happy that you don't have our problems.
      Like • Show 0 Likes0
      Actions
placebo Feb 24, 2018 7:08 AM
Mark Correct
Correct Answer
Trying the new AMD Radeon 18.2.3 drivers with the Kingdom Come Deliverance crossfire profile and the performance seems better than the previous drivers.

Anyone else notice similar?
Like • Show 0 Likes0
Actions
- brutalix @ placebo on Feb 27, 2018 5:03 AM
  Mark Correct
  Correct Answer
  Didn't notice much difference when using crossfire with two fury x cards.
  
  Kind regards.
  B.
  Like • Show 0 Likes0
  Actions

Kingdom Come: Deliverance - Crossfire? AFR friendly works

Outcomes

Related Content

Recommended Content