2 Replies Latest reply on Jan 17, 2018 11:49 AM by rogone

    ADL_SDK_V10.2 support radeon rx580?

    rogone

      Hi

      I have a problem with ADL SDK that brings an Overdrive_Sample.sln and when I compile it it does not allow me to configure the GPU clock by command line.

       

      The error that throws me is:

      ADL2_OverdriveN_Capabilities_Get is failed

       

      With the parameter "a" throws me:

      ADL2_OverdriveN_Capabilities_Get is failed

      -------------------------------------------------

      ADL2_OverdriveN_PerformanceStatus_Get Data

      -------------------------------------------------

      odNPerformanceStatus.iCoreClock: 30000

      odNPerformanceStatus.iCurrentBusLanes: 16

      odNPerformanceStatus.iCurrentBusSpeed: 2500

      odNPerformanceStatus.iCurrentCorePerformanceLevel: 0

      odNPerformanceStatus.iCurrentDCEFPerformanceLevel: 0

      odNPerformanceStatus.iCurrentGFXPerformanceLevel: 0

      odNPerformanceStatus.iCurrentMemoryPerformanceLevel: 0

      odNPerformanceStatus.iDCEFClock: 0

      odNPerformanceStatus.iGFXClock: 0

      odNPerformanceStatus.iGPUActivityPercent: 0

      odNPerformanceStatus.iMaximumBusLanes: 16

      odNPerformanceStatus.iMemoryClock: 30000

      odNPerformanceStatus.iUVDClock: 0

      odNPerformanceStatus.iUVDPerformanceLevel: 0

      odNPerformanceStatus.iVCEClock: 0

      odNPerformanceStatus.iVCEPerformanceLevel: 0

      odNPerformanceStatus.iVDDC: 0

      odNPerformanceStatus.iVDDCI: 0

      -------------------------------------------------

       

      I hope you can help me.

      Thank you

          • Re: ADL_SDK_V10.2 support radeon rx580?
            rogone

            Hi

            Sorry for my poor description, here I leave the requested.

             

            Describe your system:

            AMD Graphics Card

              • GIGABYTE RX 580 GAMING 8Gb (GV-RX580GAMING-8GD)
            • Desktop or Laptop System
              • Desktop
            • Operating System
              • Windows 10 Pro 64bit - Version: 1709
            • Driver version installed
            • 17.30.1029-170808a2-317304E-CrimsonReLive

            • Display Devices
              • LG W2243S 1920x1080 @60Hz
            • Motherboard + Bios Revision
              • Gigabyte_GA-Z77X-UD3H   BIOS: f20e
            • CPU/APU
              • Intel Core i3-3240 3.4Ghz
            • Power Supply Unit  Make, Model & Wattage
              • XFX PRO 850W Full Modular
            • RAM
              • Kingston 8GB 1600Mhz

            Describe your issue:

             

            I downloaded the ADL_SDK_V10.2 and compiled the Sample OverdriveN to try configuring the overclocking of my GPU by command line.

            -------------------------------------------------- ---------------------------

            Available command line parameters: f- Fan, g-GPU clocks, t-temp, m-Memory Clocks, a- Activity, r-reset

            SClocks Get: ODNEXT.exe g

            SClocks Set: ODNEXT.exe g X Y Z; X - Level, Y - (1: Clock, 2: Voltage), Z - Expected value should be in min max range

            MClocks Get: ODNEXT.exe m

            MClocks Set: ODNEXT.exe m X Y Z; X - Level, Y - (1: Clock, 2: Voltage), Z - Expected value should be in min max range

            FAN Get: ODNEXT.exe f

            FAN Set: ODNEXT.exe f X Y; X - (1: Minimum Fan Speed, 2: Target Fan Speed, 3: Minimum Performance, 4: Target Temp), Y - Expected value should be in min max range

            Temp Get: ODNEXT.exe t

            Temp Set: ODNEXT.exe t X Y; X - (1: Maximum OP Temperature, 2: TDP LIMIT), Y - Expected value should be in min max range

            Activity Get: ODNEXT.exe a

            OD Reset: ODNEXT.exe r

            ----------------------------------------------- ---------------------------

             

            It compiles everything without problems but when I execute the commands with default parameters it throws me errors.

            For example (I run the application with the "g" parameter to see the status of the GPU clock) and I get this error:

             

            ADL2_OverdriveN_Capabilities_Get is failed

             

            The same thing happens when I want to see the memory clock!  I need to configure something more besides compiling the Sample?

             

            Thank you