2 Replies Latest reply on Dec 31, 2017 8:46 AM by pb91292

    no display when starting up

    pb91292

      I recently upgraded my PC, specs are as follows

       

      MSI A320M Bazooka

      Ryzen 5 1500X

      ASUS GTX 1060 6GB Turbo

      Ballistix 8GB DDR4 2400

      A 500W PSU (not sure of brand, came with the original prebuilt pc)

       

      Now I've installed all the parts, I start up the PC and get no display on the monitor.

       

      So far i've tried different HDMI cables, different monitors, my old GPU, moving the slot the RAM was in, none of which worked.

      Any ideas? Sorry if this is posted in the wrong section.

        • Re: no display when starting up
          qwixt

          This might sound stupid, but you hooked the hdmi cable up to the gpu, not the motehrboard right?

           

          From the manual,

           

          • If 3 long beeps are heard, remove all memory modules and try to install only one memory module in the DIMMA2 slot first and then restart the computer.
          • If 1 long 2 short beeps are heard, remove and reinstall the graphics card and then restart the computer
            • Re: no display when starting up
              pb91292

              Yeah I’ve had it plugged into the gpu. Actually tried both.

              I’ve read some stuff about the bios potentially trying to use the gpu but as it’s a new build will it even have drivers? But I’m sure I tried last night without the gpu in and nothing happened. So yeah i dunno what else to try.

               

              Sent from my iPhone