1stinertiafxs

I Solved AMD's 4 DIMM PROBLEM

Discussion created by 1stinertiafxs on Nov 12, 2017
Latest reply on Nov 22, 2017 by blazek

Hi All

 

Am not sure if am sharing this information in the right place but here goes

 

what I found to be the main problem with running high speed memory on ryzen when running 4 dimms was the ohm rate it was set to and recommended to be set to this tip will also help with 2 dimms and high speeds

 

first thing to do is set your xmp profile in my case I have ddr4 with
base clock of 2133 15-15-15-15-36
and oc profile of 2933 15-17-17-17-35

 

after setting your xmp reboot back to bios

 

if your bios still shows the base clock then you have the same problem as me (base clock speed on the right of bios still shows 2133)

 

so I fixed this by reducing the ohm rate from 60 to 40

 

now I have 4 dims running at 2933 with no issues or problems

 

so with a further overclock of the FSB to 102.2 they are running fine and stable at 2997

 

not sure if this is the right place for this post as its my first post here and not quite sure where to post this but I hope this helps anyone having any memory problems

 

 

My Stduio Setup (AMD 1800x)

http://www.userbenchmark.com/UserRun/5735422


UserBenchmarks: Game 117%, Desk 102%, Work 111%

CPU: AMD Ryzen 7 1800X - 101.9%

GPU: Nvidia GTX 1080 - 136.7%

SSD: Samsung 850 Pro 512GB - 114.6%

HDD: WD Blue SSHD 4TB (2015) - 60.3%

USB: Samsung M3 Portable 2TB - 36.1%

USB: Samsung M3 Portable 2TB - 10.7%

RAM: Corsair CMR32GX4M4C3000C15 4x8GB - 101.5%

MBD: Asus CROSSHAIR VI HERO

 

ill be back to post more about this as I have been advised I can run the fsb at 104 with no issues so am running some tests and all seems great so far

thanks for the advice

daquteness

Outcomes