Not a typical "build" and I will take this off this Forum if anyone is unhappy that it is not a full PC Build.
Note that AMD XConnect Drivers are only officially supported on Windows 10 using Thunderbolt 3.
They are not officially supported on Thunderbolt 2 or Thunderbolt 1, or with Windows 8.1 64bit OS. I will post more info on that later perhaps.
I just thought this might be of interest to anyone who needs to take an AMD GPU "out and about" in a very small portable form factor and quick to set up format, as I do.
I also think it is a really good example to demonstrate how great the R9 Nano card really was at launch, still is today, and to show the advantage of AMD HBM technology along with AMD XConnect Drivers.
There are now a number of PC laptops and Motherboards which incorporate Thunderbolt 1 and Thunderbolt 2 technology.
Intel Thunderbolt 3 Technology licensing is changing in future - you can see the information here: Intel takes two big steps to push Thunderbolt 3 on PCs
Therefore it might be more common to be able to run your external Graphics Card with Thunderbolt 3 in future.
I used the following Thunderbolt Enclosure for the above eGPU: AKiTiO Thunder2 PCIe Box | PCI Express Expansion Box with Thunderbolt 2 Interface | AKiTiO
There is now a Thunderbolt 3 version of that enclosure, and a Thunderbolt 3 eGPU from Akitio which contains a built in Power Supply and is for use with larger cards.
I was hoping to see the "RX Vega Nano" launched sometime soon.
When that happens, it would be great if someone out there (Maybe from AMD) could try out a small form factor Akitio Thunderbolt 3 enclosure with an AMD "RX Vega Nano" please.
There was some information about the RX Vega Nano here:
AMD Announces the Radeon RX Vega Nano | TechPowerUp
But I have seen nothing more recenly about that yet.
What are you connecting this to?