12 Replies Latest reply on Sep 22, 2017 8:30 AM by blackair

    System Crash with no BSOD after installing any Graphics drivers

    blackair

      AMD Graphics Card

        • AMD R9 270x

      Desktop or Laptop System

        • Desktop

      Operating System

        • Windows 10 64bit

      Driver version installed

        • Crimson ReLive Edition 17.7.2 tried also Crimson ReLive Edition 17.9.1  and Crimson-ReLive-16.12.1

      Display Devices

      • Benq GL2750 Hdmi
      • Asrock A320M-DGS Bios Version 3.10
      • CPU/APU
        • AMD Ryzen 3 1200
      • Power Supply Unit  Make, Model & Wattage
        • EVGA 700B 80+ Bronze
      • RAM
        • 4gb

      Describe your issue:

           After installing GPU drivers computer will hang for a few seconds then proceed to restart but gets stuck somewhere with CPU fan spinning and GPU fans stopping and starting with nothing appearing on the monitor and no lights appearing on keyboard and mouse until i hold the power button to power off or manually press the restart switch. Have tried using the card in another system with same windows and works perfectly fine, the issue can happen after 10 seconds after logging in or up to 30 mins after.

       

      Things done to try to remedy this issue:

      Clean install.

      Use other drivers.

      Test Graphics card in another system.

      RMA'd cpu and motherboard to eliminate them as cause.

      Tested on windows 7 ultimate 64bit