2 Replies Latest reply on Aug 10, 2017 8:54 AM by mayem611

    After installing Radeon Settings version 17.4.4, the Mini Displayports on my R9 295x video card doesn't work

    mayem611

      After updating to the newest version of Radeon Settings version 17.4.4 and restarting my PC, both monitors would enter sleep mode just after the Windows screen during startup. I booted up in Safe Mode several times and deleted all of the AMD software then started back up normally and re-downloaded everything. I finally got to the point to where I have the monitor with the HDMI to Mini Displayport unplugged, one of my R9 295x graphics cards removed and version 17.4.4 installed to where I only have the DVI monitor plugged in and working. As soon as I plug in the Mini Displayport in, the DVI monitor goes to sleep.

       

      I have a dual monitor setup, one with DVI and the other with HCMI to Mini Displayport

      Monitor with DVI is HP 25bw; Monitor with HCMI to Mini Displayport is HP 2511x

       

      Operating System: Windows 7 Ultimate 64-bit SP1

      CPU: AMD FX-9590  Vishera 32nm Technology

      RAM: 16.0GB Dual-Channel DDR3 @ 668MHz (11-11-11-28)

      Motherboard: ASUSTeK COMPUTER INC. CROSSHAIR V FORMULA-Z (Socket 942)

      Graphics: 4096MB ATI AMD Radeon R9 200 Series (ATI), 4096MB ATI AMD Radeon R9 200 Series (ATI), 4096MB ATI AMD Radeon R9 200 Series (ATI), 4096MB ATI AMD Radeon R9 200 Series (ATI)

      Storage: 465GB Samsung SSD 850 EVO 500GB ATA Device (SSD), 465GB Samsung SSD 850 EVO 500GB ATA Device (SSD), 221GB AMD 2+0 Stripe/RAID0 SCSI Disk Device (SSD), 931GB ST1000DM003-1CH1 SCSI Disk Device (SATA)

      Optical Drives: HL-DT-ST BDDVDRW CH10LS28 SCSI CdRom Device

      Audio: Realtek High Definition Audio