2 Replies Latest reply on Mar 15, 2017 9:45 AM by silverbody

    Trouble enabling AMD Freesync



      I have recently setup two new freesync monitors. I have them in extended mode. Been trying to get AMD Freesync to work on the primary display. I have the displayport 1.2 and AMD Freesync activated in the monitors OSD but the AMD Crimson software still says that AMD Freesync is not supported. I have switched the displayport to the second monitor and activated displayport and freesync on it then restarted nothing. Tried just hooking one monitor up at a time via the displayport and restarting after I turned on displayport and freesync. Did that with both monitors. Installed the latest monitor drivers. Disabled crossfire then restarted still nothing. Below you will find my pc setup. Thanks in advance.


      Sapphire Vapor-X R9 290X and a Powercolor HD 7970 in crossfire




      Windows 10 64bit


      Driver version installed
      Radeon Software Crimson Edition 16.12.2


      Display Devices

      Viewsonic VX2457-mhd 1920x1080 @60hz connected via displayport

      Viewsonic VX2457-mhd 1920x1080 @60hz connected via HDMI


      Asus Sabertooth 990FX R2.0



      FX 9590


      Power Supply Unit

      Corsair HX Series HX850 850W Gold