AnsweredAssumed Answered

OpenCL linux amd Radeon R7 m440

Question asked by co4uhutejib on Oct 13, 2016

Hi. I have laptop with cpu and gpu from amd.

lspci -v

00:01.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Carrizo (rev ca) (prog-if 00 [VGA controller])

DeviceName: ATI EG BROADWAY

Subsystem: Hewlett-Packard Company Carrizo

Flags: bus master, fast devsel, latency 0, IRQ 227

Memory at e0000000 (64-bit, prefetchable) [size=256M]

Memory at d2800000 (64-bit, prefetchable) [size=8M]

I/O ports at 5000 [size=256]

Memory at d3500000 (32-bit, non-prefetchable) [size=256K]

Expansion ROM at d0200000 [disabled] [size=128K]

Capabilities: <access denied>

Kernel driver in use: amdgpu

Kernel modules: amdgpu

 

06:00.0 Display controller: Advanced Micro Devices, Inc. [AMD/ATI] Topaz XT [Radeon R7 M260/M265] (rev 83)

Subsystem: Hewlett-Packard Company Topaz XT [Radeon R7 M260/M265]

Flags: bus master, fast devsel, latency 0, IRQ 229 Memory at c0000000 (64-bit, prefetchable) [size=256M]

Memory at d0000000 (64-bit, prefetchable) [size=2M]

I/O ports at 2000 [size=256]

Memory at d3300000 (32-bit, non-prefetchable) [size=256K]

Expansion ROM at d3340000 [disabled] [size=128K]

Capabilities: <access denied>

Kernel driver in use: amdgpu Kernel modules: amdgpu

 

I try to use amdgpu-pro on ubuntu 16.04. I can run it on kernel 4.4. I can't install it on newer kernels.

And when I run opencl program, it hangs. Also all system hangs if I try to kill program or shutdown.

Is there is way to use OpenCL on my gpu on linux?

 

Sorry for bad english skills

Outcomes