0 Replies Latest reply on Aug 26, 2016 6:47 PM by dajudge

    AMDGPU Xorg freeze with Panasonic Display  (ubuntu 16.04.1 / FURY / amdgpu-pro driver[16.30.3-315407])

    dajudge

      The setup works great apart from the fact that Xorg freeze sometimes when I switch on my Panasonic display (I have two). The screens auto-switch off after no use for one hour, when I switch them back on I get the freeze:

       

      Aug 26 20:29:56 mad kernel: [46601.583954] [drm] [IfTrace_DC]   dc_commit_targets: 2 targets

      Aug 26 20:29:56 mad kernel: [46601.583956] [drm] [IfTrace_DC]   core_target 0x1430c400: stream_count=1

      Aug 26 20:29:56 mad kernel: [46601.583960] [drm] [IfTrace_DC]   core_stream 0x375d2800: src: 0, 0, 3840, 2160; dst: 0, 0, 3840, 2160;

      Aug 26 20:29:56 mad kernel: [46601.583963] [drm] [IfTrace_DC]           pix_clk_khz: 297000, h_total: 5500, v_total: 2250

      Aug 26 20:29:56 mad kernel: [46601.583965] [drm] [IfTrace_DC]           sink name: Panasonic-TV, serial: 16843009

      Aug 26 20:29:56 mad kernel: [46601.583968] [drm] [IfTrace_DC]           link: 1

      Aug 26 20:29:56 mad kernel: [46601.583970] [drm] [IfTrace_DC]   core_target 0x4362f300: stream_count=1

      Aug 26 20:29:56 mad kernel: [46601.583973] [drm] [IfTrace_DC]   core_stream 0xbed2c000: src: 0, 0, 0, 0; dst: 0, 0, 0, 0;

      Aug 26 20:29:56 mad kernel: [46601.583976] [drm] [IfTrace_DC]           pix_clk_khz: 297000, h_total: 5500, v_total: 2250

      Aug 26 20:29:56 mad kernel: [46601.583978] [drm] [IfTrace_DC]           sink name: Panasonic-TV, serial: 16843009

      Aug 26 20:29:56 mad kernel: [46601.583980] [drm] [IfTrace_DC]           link: 2

      Aug 26 20:29:56 mad kernel: [46601.585644] [drm] [Detection_DP caps]    Link: 2 eDP panel mode supported: 0 eDP panel mode enabled: 0

      Aug 26 20:29:56 mad rtkit-daemon[8492]: Supervising 3 threads of 1 processes of 1 users.

      Aug 26 20:29:56 mad rtkit-daemon[8492]: Successfully made thread 20440 of process 8488 (n/a) owned by '1000' RT at priority 5.

      Aug 26 20:29:56 mad rtkit-daemon[8492]: Supervising 4 threads of 1 processes of 1 users.

      Aug 26 20:29:56 mad kernel: [46601.597917] [drm] [Conn_LKTN]    [DP-3] HBR2x4 pass VS=0, PE=0^

      Aug 26 20:29:56 mad kernel: [46601.600888] [drm] [Conn_Mode]    [DP-2] {3840x2160, 5500x2250@297000Khz}^

      Aug 26 20:29:56 mad kernel: [46601.600893] [drm] [Conn_Mode]    [DP-3] {3840x2160, 5500x2250@297000Khz}^

      Aug 26 20:29:56 mad kernel: [46601.600896] [drm] [Sync_Timing]  GSL: Setting-up...

      Aug 26 20:29:56 mad kernel: [46601.600900] [drm] [Sync_Timing]  GSL: enabling trigger-reset

      Aug 26 20:29:56 mad kernel: [46601.600904] [drm] [Sync_Timing]  GSL: waiting for reset to occur.

      Aug 26 20:29:56 mad kernel: [46601.602959] [drm] [Sync_Timing]  GSL: reset occurred at wait count: 1

      Aug 26 20:29:56 mad kernel: [46601.602961] [drm] [Sync_Timing]  GSL: disabling trigger-reset.

      Aug 26 20:29:56 mad kernel: [46601.602965] [drm] [Sync_Timing]  GSL: Restoring register states.

      Aug 26 20:29:56 mad kernel: [46601.602968] [drm] [Sync_Timing]  GSL: Set-up complete.

      Aug 26 20:29:56 mad kernel: [46601.602971] [drm] DM_NOT_IMPL: dm_bandwidth_update

      Aug 26 20:29:56 mad kernel: [46601.604297] [drm] [IfTrace_DC]   dc_commit_surfaces_to_target: commit 1 surfaces to target 0x4362f300

      Aug 26 20:29:56 mad kernel: [46601.604303] [drm] [IfTrace_DC]   Pipe:1 0xbed2e000: addr hi:0x0, addr low:0x10260000, src: 0, 0, 3840, 2160; dst: 0, 0, 3840, 2160;

      Aug 26 20:30:04 mad kernel: [46609.433293] [drm] [HwTrace_Hotplug]      link=2, dc_sink_in=          (null) is now Disconnected

      Aug 26 20:30:04 mad kernel: [46609.433299] [drm] DCHPD: connector_id=2: Old sink=ffff88053010ac00 New sink=          (null)

      Aug 26 20:30:04 mad kernel: [46609.731774] [drm] [HwTrace_Hotplug]      link=1, dc_sink_in=          (null) is now Disconnected

      Aug 26 20:30:04 mad kernel: [46609.731780] [drm] DCHPD: connector_id=1: Old sink=ffff880530108000 New sink=          (null)

      Aug 26 20:30:05 mad org.gnome.Nautilus[8197]: (nautilus:16661): Gdk-ERROR **: The program 'nautilus' received an X Window System error.

      Aug 26 20:30:05 mad org.gnome.Nautilus[8197]: This probably reflects a bug in the program.

      Aug 26 20:30:05 mad org.gnome.Nautilus[8197]: The error was 'BadDrawable (invalid Pixmap or Window parameter)'.

      Aug 26 20:30:05 mad org.gnome.Nautilus[8197]:   (Details: serial 248979 error_code 9 request_code 62 (core protocol) minor_code 0)

       

      Xorg.log is attached.

       

      Is this a known problem, or solution is there for?