0 Replies Latest reply on Apr 26, 2016 1:29 PM by brettcarr2412

    R7 370 won't show graphical boot screen on Centos 7

    brettcarr2412

      Hi, I recently installed the R7 370 graphics card in my new build.  After searching all the Linux forums for weeks i cannot find the solution. I'm hoping someone here might be able to assist. I have included my install log. What my issue is exactly , When booting Centos 7 will only show the text based boot screen, I need it to show the graphical Plymouth boot screen the my companies logo on it.

      I cannot find a clear solution after trying several which made no difference what so ever

       

      Supported adapter detected.

      Check if system has the tools required for installation.

      Uninstalling any previously installed drivers.

      Unloading drm module...

      rmmod: ERROR: Module drm is in use by: ttm drm_kms_helper

      [Message] Kernel Module : Trying to install a precompiled kernel module.

      [Message] Kernel Module : Precompiled kernel module version mismatched.

      [Message] Kernel Module : Found kernel module build environment, generating kernel module now.

      AMD kernel module generator version 2.1

      doing Makefile based build for kernel 2.6.x and higher

      rm -rf *.c *.h *.o *.ko *.a .??* *.symvers

      make -C /lib/modules/3.10.0-327.13.1.el7.x86_64/build SUBDIRS=/usr/lib/modules/fglrx/build_mod/2.6.x modules

      make[1]: Entering directory `/usr/src/kernels/3.10.0-327.13.1.el7.x86_64'

        CC [M]  /usr/lib/modules/fglrx/build_mod/2.6.x/firegl_public.o

        CC [M]  /usr/lib/modules/fglrx/build_mod/2.6.x/kcl_acpi.o

      /usr/lib/modules/fglrx/build_mod/2.6.x/kcl_acpi.c: In function ‘KCL_ACPI_No_Hotplug’:

      /usr/lib/modules/fglrx/build_mod/2.6.x/kcl_acpi.c:861:22: warning: unused variable ‘pdev’ [-Wunused-variable]

           struct pci_dev  *pdev = (struct pci_dev*)dev;

                            ^

      /usr/lib/modules/fglrx/build_mod/2.6.x/kcl_acpi.c: At top level:

      /usr/lib/modules/fglrx/build_mod/2.6.x/kcl_acpi.c:839:20: warning: ‘KCL_ACPI_Slot_No_Hotplug’ defined but not used [-Wunused-function]

      static acpi_status KCL_ACPI_Slot_No_Hotplug(KCL_ACPI_DevHandle handle, u32 lvl, void *data, void **rv)

                          ^

        CC [M]  /usr/lib/modules/fglrx/build_mod/2.6.x/kcl_agp.o

        CC [M]  /usr/lib/modules/fglrx/build_mod/2.6.x/kcl_debug.o

        CC [M]  /usr/lib/modules/fglrx/build_mod/2.6.x/kcl_ioctl.o

        CC [M]  /usr/lib/modules/fglrx/build_mod/2.6.x/kcl_io.o

        CC [M]  /usr/lib/modules/fglrx/build_mod/2.6.x/kcl_pci.o

        CC [M]  /usr/lib/modules/fglrx/build_mod/2.6.x/kcl_str.o

        CC [M]  /usr/lib/modules/fglrx/build_mod/2.6.x/kcl_iommu.o

        CC [M]  /usr/lib/modules/fglrx/build_mod/2.6.x/kcl.o

        CC [M]  /usr/lib/modules/fglrx/build_mod/2.6.x/kcl_wait.o

        LD [M]  /usr/lib/modules/fglrx/build_mod/2.6.x/fglrx.o

        Building modules, stage 2.

        MODPOST 1 modules

        CC      /usr/lib/modules/fglrx/build_mod/2.6.x/fglrx.mod.o

        LD [M]  /usr/lib/modules/fglrx/build_mod/2.6.x/fglrx.ko

      make[1]: Leaving directory `/usr/src/kernels/3.10.0-327.13.1.el7.x86_64'

      build succeeded with return value 0

      duplicating results into driver repository...

      done.

      You must change your working directory to /lib/modules/fglrx

      and then call ./make_install.sh in order to install the built module.

      - recreating module dependency list

      - trying a sample load of the kernel modules

      done.

      [Reboot] Kernel Module : dracut

       

      After the installation I haven't been able t o find any errors. Im very Lost any assistance would be very appreciated

       

      Motherboard: is asRock 980DE3/U3S3 R2.0

      Ram: 16 gig

      Processor: AMD FX(tm)-6300 Six-Core Processor × 6

      power suppy: Thermaltake TR2 700W Gold

      graphics Card: AMD Radeon (TM) R7 370 Series

       

      Message was edited by: Brett Carr Updated system details