0 Replies Latest reply on Mar 21, 2016 6:46 AM by kiimse

    [Solved] "No Signal" After installing the lastest Update for R9 390

    kiimse

      Hej Guys,

       

      I got a little problem. I saved up some money and bough a gaming setup. After installing the drivers from the driver CD I got (Radeon R9 390), my BenQ goes black after restart. ("no signal detected")
      Only way to get my screen back up running is to delete the Driver in Windows Save Mode. I tried plugging my Cabels in and out, nothing worked :L

      • AMD Graphics Card
        • Edit: AMD Radeon R9 390 Powercolor
      • Desktop or Laptop System
        • Desktop
      • Operating System
        • Windows 7 Home Premium 64 Bit
      • Driver version installed
        • The one thats on the CD :c ... Where do i see ? (
        • Edit: AMD Radeon Software Crimson Edition Display Driver version 15.30.1025.1001 ??????
      • Display Devices
        • BenQ GL2460 - 24"- 250 cd/m2 - 2ms (GtG) - D-sub, DVI-D - 30-83 kHz / 50-76 Hz
      • Motherboard
        • ASRock H170M Pro4
      • CPU/APU
        • Intel i5 - 6600 @ 3.30GHz    3.30GHz Skylake
      • Power Supply Unit  Make, Model & WattageRAM
        • 750 Watt Corsair CX Series Modular 80+ Bronze
      • RAM
        • 8GB Ram

       

       

      So it solved itself, kind of.

      I updated my nearly installed W7 with 231 Updates, and then only installed the GPU Driver, instead of anything else that comes with the "Install Pack".. Lucky my