What is a case example, and possible provide pictures for mounting 2 stock crossfire fury x, no modding, airflow prefferred for cpu, I did see
The Fury X just uses regular 120mm radiators, so assuming your CPU is also liquid cooled, the Corsair C70 would work very well. CPU cooler on the bottom sucking in, one Fury X on the rear sucking in, one on the drive cage sucking in, with 2 side panel and 2 top fans blowing out.
The 900D is very unnecessary, but the mounting points would be the same, though you could put them all on the bottom sucking in cold air and exhausting out of the top.
Does the push fan on the radiator work that way, mounting the fan pushing air from the case essentially pushing by trying to pull airflow from outside? I'm just skeptical to do it that way because I want an optimal airflow and don't want to damage anything.
Will it properly work, because from what I understand it is push not pull on the radiator fan, so it facing from the front and radiator on the inside would work, I think i've seen it but I'm skeptical and don't want to damage anything.
Correct, it is push on the Fury X. I would recommend setting them up as exhaust in your case, it will give you lower case/component temps. Setting it as intake may give you slightly lower core temps, but you'll be dumping all the heat in your case.
Retrieving data ...