I have a HP 8560w with AMD FirePro M5950 (see full specs at bottom of post).
I would like to use the single displayport on my laptop to connect 2 2560*1440 screens using the MST feature:
either with a MST hub or with screen that have a MST hub built-in such as the Dell Ultrasharp U2715H
Now I struggle to get an official confirmation that my M5950 has the displayport 1.2 specification, although some documents state it is, for example: -
and the HP 8560w support and maintenance guide does hint by saying: "DisplayPort (1.1a for models having NVIDIA graphics cards, 1.2 for modules having AMD graphics cards)" - source: http://h20628.www2.hp.com/km-ext/kmcsdirect/emr_na-c03424153-1.pdf
Has anybody tried this or is there anybody who can confirm for 100% that my graphics card fully supports the displayport 1.2 standard?
|Graphics Card Manufacturer||Powered by AMD|
|Graphics Chipset||AMD FirePro M5950 (FireGL V)|
|Subsystem Vendor ID||103C|
|Graphics Bus Capability||PCI Express 2.0|
|Maximum Bus Setting||PCI Express 2.0 x16|
|BIOS Part Number||BR041777-001|
|Memory Size||1024 MB|
|Core Clock in MHz||725 MHz|
|Memory Clock in MHz||900 MHz|
|Total Memory Bandwidth in GByte/s||57.6 GByte/s|