AnsweredAssumed Answered

fglrx 15.302 / Debian jessie crash

Question asked by bucketsize on Dec 26, 2015
Latest reply on Dec 26, 2015 by bucketsize

Hi,

I have the latest Debian jessie.

I installed latest: amd-driver-installer-15.302-x86.x86_64.run

 

1. After install -> reboot, Xorg was getting reference to fglrx 32bit libs, I had to run /usr/lib64/fglrx/{switchlibGL  switchlibglx} to get the correct 64bit versions referred.

2. After reboot, i am now getting a blank screen on vt7 and keyboard and system hangs, I can't even switch between vt's.

 

Have the following desktop  configuration:

Header 1

lspci

00:00.0 Host bridge: Advanced Micro Devices, Inc. [AMD] RS780 Host Bridge

00:02.0 PCI bridge: Advanced Micro Devices, Inc. [AMD] RS780 PCI to PCI bridge (ext gfx port 0)

00:04.0 PCI bridge: Advanced Micro Devices, Inc. [AMD] RS780/RS880 PCI to PCI bridge (PCIE port 0)

00:11.0 SATA controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 SATA Controller [IDE mode]

00:12.0 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI0 Controller

00:12.1 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0 USB OHCI1 Controller

00:12.2 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB EHCI Controller

00:13.0 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI0 Controller

00:13.1 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0 USB OHCI1 Controller

00:13.2 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB EHCI Controller

00:14.0 SMBus: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 SMBus Controller (rev 3c)

00:14.1 IDE interface: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 IDE Controller

00:14.2 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 Azalia (Intel HDA)

00:14.3 ISA bridge: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 LPC host controller

00:14.4 PCI bridge: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 PCI to PCI Bridge

00:14.5 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI2 Controller

00:18.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h Processor Function 0

00:18.1 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h Processor Function 1

00:18.2 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h Processor Function 2

00:18.3 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h Processor Function 3

00:18.4 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h Processor Function 4

00:18.5 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h Processor Function 5

01:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Cape Verde PRO [Radeon HD 7750 / R7 250E]

01:00.1 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] Cape Verde/Pitcairn HDMI Audio [Radeon HD 7700/7800 Series]

02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 06)

 

lscpu

Architecture:          x86_64

CPU op-mode(s):        32-bit, 64-bit

Byte Order:            Little Endian

CPU(s):                4

On-line CPU(s) list:   0-3

Thread(s) per core:    2

Core(s) per socket:    2

Socket(s):             1

NUMA node(s):          1

Vendor ID:             AuthenticAMD

CPU family:            21

Model:                 1

Model name:            AMD FX(tm)-4100 Quad-Core Processor

Stepping:              2

CPU MHz:               1400.000

CPU max MHz:           3600.0000

CPU min MHz:           1400.0000

BogoMIPS:              7232.29

Virtualization:        AMD-V

L1d cache:             16K

L1i cache:             64K

L2 cache:              2048K

L3 cache:              8192K

NUMA node0 CPU(s):     0-3

 

Xorg.0.log after fglrx install and config

cat /var/log/Xorg.0.log

[    40.638]

X.Org X Server 1.16.4

Release Date: 2014-12-20

[    40.638] X Protocol Version 11, Revision 0

[    40.638] Build Operating System: Linux 3.16.0-4-amd64 x86_64 Debian

[    40.638] Current Operating System: Linux swetha-pc 3.16.0-4-amd64 #1 SMP Debian 3.16.7-ckt20-1+deb8u1 (2015-12-14) x86_64

[    40.638] Kernel command line: BOOT_IMAGE=/vmlinuz-3.16.0-4-amd64 root=/dev/mapper/VolGP00-root ro quiet

[    40.638] Build Date: 11 February 2015  12:32:02AM

[    40.638] xorg-server 2:1.16.4-1 (http://www.debian.org/support)

[    40.638] Current version of pixman: 0.32.6

[    40.638]     Before reporting problems, check http://wiki.x.org

    to make sure that you have the latest version.

[    40.638] Markers: (--) probed, (**) from config file, (==) default setting,

    (++) from command line, (!!) notice, (II) informational,

    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.

[    40.638] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Dec 26 11:13:51 2015

[    40.638] (==) Using config file: "/etc/X11/xorg.conf"

[    40.638] (==) Using system config directory "/usr/share/X11/xorg.conf.d"

[    40.638] (==) ServerLayout "aticonfig Layout"

[    40.638] (**) |-->Screen "aticonfig-Screen[0]-0" (0)

[    40.638] (**) |   |-->Monitor "aticonfig-Monitor[0]-0"

[    40.639] (**) |   |-->Device "aticonfig-Device[0]-0"

[    40.639] (==) Automatically adding devices

[    40.639] (==) Automatically enabling devices

[    40.639] (==) Automatically adding GPU devices

[    40.639] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.

[    40.639]     Entry deleted from font path.

[    40.639] (==) FontPath set to:

    /usr/share/fonts/X11/misc,

    /usr/share/fonts/X11/100dpi/:unscaled,

    /usr/share/fonts/X11/75dpi/:unscaled,

    /usr/share/fonts/X11/Type1,

    /usr/share/fonts/X11/100dpi,

    /usr/share/fonts/X11/75dpi,

    built-ins

[    40.639] (==) ModulePath set to "/usr/lib/xorg/modules"

[    40.639] (II) The server relies on udev to provide the list of input devices.

    If no devices become available, reconfigure udev or disable AutoAddDevices.

[    40.639] (II) Loader magic: 0x7f139d7edd80

[    40.639] (II) Module ABI versions:

[    40.639]     X.Org ANSI C Emulation: 0.4

[    40.639]     X.Org Video Driver: 18.0

[    40.639]     X.Org XInput driver : 21.0

[    40.639]     X.Org Server Extension : 8.0

[    40.640] (--) PCI:*(0:1:0:0) 1002:683f:1043:0427 rev 0, Mem @ 0xd0000000/268435456, 0xfeb80000/262144, I/O @ 0x0000d000/256, BIOS @ 0x????????/131072

[    40.640] (II) "glx" will be loaded by default.

[    40.640] (II) LoadModule: "glx"

[    40.640] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so

[    40.641] (II) Module glx: vendor="X.Org Foundation"

[    40.641]     compiled for 1.16.4, module version = 1.0.0

[    40.641]     ABI class: X.Org Server Extension, version 8.0

[    40.641] (==) AIGLX enabled

[    40.641] (II) LoadModule: "fglrx"

[    40.642] (II) Loading /usr/lib/xorg/modules/drivers/fglrx_drv.so

[    40.668] (II) Module fglrx: vendor="FireGL - AMD Technologies Inc."

[    40.668]     compiled for 1.4.99.906, module version = 15.30.3

[    40.668]     Module class: X.Org Video Driver

[    40.668] (II) Loading sub module "fglrxdrm"

[    40.668] (II) LoadModule: "fglrxdrm"

[    40.668] (WW) Warning, couldn't open module fglrxdrm

[    40.668] (II) UnloadModule: "fglrxdrm"

[    40.668] (II) Unloading fglrxdrm

[    40.668] (EE) Can't load FireGL DRM library (libfglrxdrm.so).

[    40.668] (II) AMD Proprietary Linux Driver Version Identifier:15.30.3

[    40.668] (II) AMD Proprietary Linux Driver Release Identifier: UNSUPPORTED-15.302                  

[    40.668] (II) AMD Proprietary Linux Driver Build Date: Dec 17 2015 02:43:16

[    40.668] (++) using VT number 7

 

[    40.668] (WW) Falling back to old probe method for fglrx

[    40.668] (EE)

[    40.668] (EE) Backtrace:

 

3. Wonder if the is a 'no such file of directory' error, but the message is atypical, and the promised backtrace seems to be missing. I could add ModulePath referencing more libs?

4. Should I try some other version of the driver?

 

-- thanks, JB

Outcomes