2 Replies Latest reply on Sep 30, 2015 12:21 PM by awl6745

    FirePro W5000 DVI Output Intermittent


      I have a Dell T3600 workstation running Windows7, with 2 FirePro W5000 cards installed.

      AMD Driver date is 8/16/2014

      Each card has 3 outputs: 2 DisplayPort, 1 DVI-I

      These cards are driving 4 NEC 46" X463UN monitors. (This will soon be expanding to 6 monitors.)

      I currently am using 1 DisplayPort and 1 DVI output from each card, to drive my 4 monitors.

      My problem is that one of the DVI outputs will just not work.

      The monitor connected to that output will not see a signal and will go into PowerSave mode.

      If I reboot the PC, or power cycle the monitors, then the non-working DVI output is normal, while the second DVI output stops working.

      So only 1 DVI output will work at a time.

      Any suggestions on what is going on here?

      Thank You.