6 Replies Latest reply on Sep 9, 2015 5:48 AM by kadogo

    Debian Jessie segfault in Xorg

    kadogo

      Hello,

       

      I tried two ways to install fglrx driver (Debian repo, official run file).

      But I have the same issue with the two ways.

       

      I did the next steps:

      - apt-get install fglrx-driver

      - aticonfig --initial (I tried add only device section too => ATIProprietary - Debian Wiki )- reboot

      - Lightdm not start (I must remove xorg.conf and restart lightdm to have a graphical interface)

       

      I attach my lspci entry and my xorg log.

       

      Thanks for your help.

        • Re: Debian Jessie segfault in Xorg
          sorath

          Hello.

           

          Try to use "aticonfig --initial -f" (as root) instead of "aticonfig --initial".

          Also check if the Section "Device" of  generated "xorg.conf" has string

          BusID       "PCI:a:0:0"

          (as it's busID of "0a:00.0 Display controller") after

          Driver      "fglrx"

          Note that without xorg.conf your notebook use Intel video-driver integrated to CPU.

          Also note that if you use radeon videocard on you notebook then battery-life will shorter than with Intel GPU.

           

          This info is from this article.

          • Re: Debian Jessie segfault in Xorg
            natasha

            lspci:

            0a:00.0 Display controller [0380]: Advanced Micro Devices, Inc. [AMD/ATI] Topaz PRO [Radeon R5 M255] [1002:6901]

             

            Xorg.0.log:

            [    30.842] (--) PCI: (0:10:0:0) 1002:6901:103c:224a rev 0, Mem @ 0xa0000000/268435456, 0xb0000000/2097152, 0xd1000000/262144, I/O @ 0x00003000/256, BIOS @ 0x????????/131072

             

            Seems lspci gives the address of device as hex number while "X loader" (I don't know how is it called correctly) uses decimal numbers

             

            Xorg.0.log (the 1-st post):

            [    30.859] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so

            [    30.859] (II) Module intel: vendor="X.Org Foundation"

            [    30.859]     compiled for 1.15.99.904, module version = 2.21.15

            [    30.859]     Module class: X.Org Video Driver

            [    30.859]     ABI class: X.Org Video Driver, version 18.0

            [    30.859] (II) fglrx(0): pEnt->device->identifier=0x7f16e7f12ca0

            [    30.860] (EE) fglrx(0): Unspported by intel driver! vendor id 0x8086, device id 0x1616

             

            Try to update Intel driver.

            1 of 1 people found this helpful
              • Re: Debian Jessie segfault in Xorg
                kadogo

                For the persons that have the same problem.

                 

                I try xserver-xorg-video-intel of sid.

                 

                I add this line in my sources.list

                deb http://http.debian.net/debian jessie-backports main

                 

                I update my driver with this line

                apt-get install -t jessie-backports xserver-xorg-video-intel

                 

                I set my xorg.conf that aticonfig created in /etc/X11 and reboot.

                 

                And it work very nice ^^

                Thanks everyone for your help.

                 

                Edit: I not see how to close my issue, if someone can close this (or say me how I must close this)