I have just upgraded to WIN10 and I find there is no driver support!!!!!! From what I read you AMD are NOT supporting my video card "ATI FirePro (FireGL) 2460" I have only had my system 3 years! this is BULLS-CHIT if true.
Have you tried looking at the driver download pages for Workstation products for your driver ? Download Drivers
Thank Ray, the soft ware did download. When I open the Catalyst and try to arrange the monitors it sees the third monitor but I can't do anythink with it, it says it is dissabled. Also, when I try to apply settings it comes back with "can not save settings" It seems I have the same driver as before
Software not working very erratic/freezes. Again not sure where to go from here but it looks like return to WIN7 for me. I may give it a day so........but
Not quite sure what the issue is.
I run three monitors, I upgraded from WIN7 to WIN10 all was fine running the monitors under WIN7. I was not sure about the supported part until Ray answered my post. So now I've downloaded Catalyst Software "AMD FirePro Control Center" Version 2015.0622.2137.37044. Driver Pakage Version: 15.20.1045.150622a-187548c
So having trouble with software it seems, the card sees the third monitor but it says disabled. what every I try can't enable it! Also, see my post above
I'm using 2 ACER A221HQL (Mod # UMWA1AA) Monitors and 1 Samsung (Mod # 206BW) all conections DVI
So is it a AMD Driver issue or a WIN10 issue. All I know is that if I go back to WIN7 all's well, so as I said in a post above I have about 20days to revert back to WIN7 but apart from this I like WIN10 and would much prefer to keep using it
FirePro 2460 has only mDP outputs, so you must be using some sort of mDP-DVI adapters/dongles. I don't know if they are passive or active. If they are passive you should get only 2x monitors to work, regardless if in Win 7 or Win 10.
If you have passive adapters, you can try to obtain 1x mDP-DVI ACTIVE adapter from the list below and see if you get all 3x displays to work.
AMD Eyefinity Technology - Recommended Adapters
Yes I'm using mDP to DVI weather they are active or not I do not know they came with the card from my computer dealer. I'm not going there, the hardware on my system including cables is the same as when I was using WIN7. The only thing that as changed is the OS
I have this same issue, only can get 2 monitors out of 4 to work, and only sometimes. System worked fine on Win7 & Win8 previously, only change has been the OS.
Let me know if you get any resolve. I'm looking at two area's 1) BIOS update 2) Intel Driver update. For me, getting a little above my pay grade, may have to take my system in to my tech guy, To see if he can pin-point problem!
Same Issue here... My FirePro 2460 (GL) is dead in Win10 (back to 7pro here too i7s PCI-ssd's)... Downloaded/stalled the correct Driver etc... can't even see my 4 additional dell 1704FPT monitors on this server...(I have 1 other server with same config as well - (MV) same issue exact issue....also have one other server with 2 FirePro 2460 (..MV's) cards pushing 8 monitors total -nada...) Works perfectly again in 7.... If anyone has a fix please link me. Hate that I can't upgrade these units... Actively trading with these boxes. Thx
Retrieving data ...