7 Replies Latest reply on Aug 11, 2015 11:24 AM by ray_m

    ATI Mobility Radeon HD 4250 - second screen scaling problem (Catalyst Control Center)

    devoidzer0

      I am trying to output my laptop's screen to my TV via HDMI output. It works, but there is a black border around the screen on the TV. I want to adjust the scaling so it fills out the screen (I've done this before on other systems).

       

      The laptop is an Acer Aspire 5552-3691, and the GPU is an ATI Mobility Radeon HD 4250. I have the latest Catalyst driver installed with Catalyst Control Center. However, when I run CCC it has virtually no useful options, including no scaling options.

       

      I have seen "AMD Vision Engine Control Center" mentioned when Googling a solution and it seems to include a lot of options that I don't have (including scaling). I assumed this was a part of the Catalyst Control Center, but it is nowhere to be found on my system.

       

      When I open the CCC, this is what I see:

       

      http://postimg.org/image/gqw4qmlxv/

       

      I don't have the Vision Engine, or any of these options:

       

      http://support.amd.com/PublishingImages/Support/GPU-68/gpuscaling2.jpg

       

      Also tried the Advanced Display Settings in Windows (as some sites suggest), but didn't find any scaling options there either.  I had this problem on Windows 7 and recently did a clean install of Windows 10 on the laptop, and am still experiencing the same problem (I have the latest Windows 10 Catalyst drivers).

      Here are my system specs:

       

      Acer Aspire 5552-3691
      AMD Athlon II X2 P340
      4 GB DDR3
      ATI Mobility Radeon HD 4250

      15.6" LED screen (1366x768)
      Windows 10 Home (64-bit)

       

      The TVs are 1920x1080 (I've tried a Toshiba and a Vizio, same result)

       

      Any suggestions?