2 Replies Latest reply on Jun 7, 2010 12:19 PM by Raistmer

    Catalyst 10.4 and 10.5 don't see HD4870

    Raistmer
      if it installed in secondary PCI-E slot and first used by GSO9600

      OS is Windows 2003 x64, 2 PCI-E slots, first occupied by GSO9600, second by HD4870.
      Catalyst driver can't identify ATI GPU at all.
      NV GPU works OK. Monitor plugged to both GPUs.


      What can I do to enable both GPUs ?
        • Catalyst 10.4 and 10.5 don't see HD4870
          Raistmer
          Installation log:

          Catalysttm Install Manager
          Installation Report
          06/07/10 17:18:43


          Hardware information
          Name ATI Radeon Graphics Processor
          Manufacturer ATI Technologies Inc
          Device ID 0x9440
          Vendor ID 0x1002
          Class Code 0x030000
          Revision ID 0x00
          Subsystem ID 0x0502
          Subsystem vendor ID 0x1002
          Other hardware

          Existing packagesATI Catalyst Install Manager

          Packages for install
          ATI Catalyst Install ManagerFinal Status: Success
          Version of Item: 3.0.774.0
          Size: 20 Mbytes


          Other detected devices

          Manufacturer ATI Technologies Inc
          Device ID 0xaa30
          Vendor ID 0x1002
          Class Code 0x040300
          Revision ID 0x00
          Subsystem ID 0xaa30
          Subsystem vendor ID 0x1002