I have a server HPE ProLiant system with AMD Epyc CPU, BIOS A43 v1.20, with Linux kernel 4.19.71. Now, I'm trying to set CPU performance governor:
# cpupower frequency-set -g performance Setting cpu: 0 Error setting new values. Common errors: - Do you have proper administration rights? (super-user?) - Is the governor you requested available and modprobed? - Trying to set an invalid policy? - Trying to set a specific frequency, but userspace governor is not available, for example because of hardware which cannot be set to a specific frequency or because the userspace governor isn't loaded? #
I started troubleshooting:
# cpupower frequency-info analyzing CPU 0: no or unknown cpufreq driver is active on this CPU CPUs which run at the same hardware frequency: Not Available CPUs which need to have their frequency coordinated by software: Not Available maximum transition latency: Cannot determine or is not supported. Not Available available cpufreq governors: Not Available Unable to determine current policy current CPU frequency: Unable to call hardware current CPU frequency: Unable to call to kernel boost state support: Supported: yes Active: yes Boost States: 0 Total States: 3 Pstate-P0: 2000MHz Pstate-P1: 1800MHz Pstate-P2: 1500MHz # # ls /sys/devices/system/cpu/cpufreq/ <Empty> # #
For whatever reason, it thinks that cpufreq drivers are missing. However, the kernel .config has the following enabled:
CONFIG_CPU_FREQ=y CONFIG_X86_ACPI_CPUFREQ=y CONFIG_X86_ACPI_CPUFREQ_CPB=y CONFIG_X86_INTEL_PSTATE=y CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y CONFIG_CPU_FREQ_GOV_PERFORMANCE=y CONFIG_CPU_FREQ_GOV_ONDEMAND=y
I did try to disable CONFIG_X86_INTEL_PSTATE and add CONFIG_X86_POWERNOW_K8 (the only AMD-specific in the current kernel), but it didn't seem to help. Does this mean my kernel version has no full support for AMD power-related features? Do I have an option except upgrading the kernel?
So, I took some time to debug the drivers behaviour -- ``"drivers/cpufreq/cpufreq.c" and "drivers/cpufreq/acpi-cpufreq.c" and found that the driver acpi-cpufreq actually fails with message:
ACPI-based processor performance control unavailable
As far as I understand, in the driver attempts to read _PCT object from ACPI table and fails, because can't find it.
Does this mean that the BIOS on this machine has no full support of ACPI, or CPU microcode needs to be updated, or the kernel is missing something?