cancel
Showing results for 
Search instead for 
Did you mean: 

Processors

misterj
Exemplar

Re: X399 Chipset Issues ( Not Passthrough AFAIK )

Thanks, falloutboy.  As you wish.  Have you heard anything  positive from ASUS?  The 0601 is not correct as of right now.  Enjoy, John.

0 Kudos
falloutboy
Journeyman III

Re: X399 Chipset Issues ( Not Passthrough AFAIK )

So far some where between Squat and do diddlies - their support has become

so so bad.

0 Kudos
falloutboy
Journeyman III

Re: X399 Chipset Issues ( Not Passthrough AFAIK )

Why are these people so SLOW, I posted them 48 hours ago, rang them

yesterday and then had to re-e-mail them to get things started... sheesh a

snail would move with more urgency than this.

On Mon, Jun 11, 2018 at 2:55 AM, Chasse Court <chasse.court@gmail.com>

0 Kudos
elstaci
MVP

Re: X399 Chipset Issues ( Not Passthrough AFAIK )

while browsing this AMD Forum:AMD Server Gurus I noticed something about a new tuning guide for the Mellanox NIC cards. Don't know if this applies to you are not. New Windows 2016 Mellanox 100GbE NIC Tuning Guide Posted on AMD Developer Central

0 Kudos
falloutboy
Journeyman III

Re: X399 Chipset Issues ( Not Passthrough AFAIK )

Thanks for the thought - but unfortunately not - the machine would need to

be able to see the card in order to tune the card.

0 Kudos
elstaci
MVP

Re: X399 Chipset Issues ( Not Passthrough AFAIK )

LoL, I guess that was a "DOH" moment when I wrote that comment. I forgot that your motherboard doesn't recognize you NIC cards.

0 Kudos
falloutboy
Journeyman III

Re: X399 Chipset Issues ( Not Passthrough AFAIK )

We all have those, i appreciate the thought though.

0 Kudos
misterj
Exemplar

Re: X399 Chipset Issues ( Not Passthrough AFAIK )

falloutboy, anything useful from ASUS?  Enjoy, John.

0 Kudos
elstaci
MVP

Re: X399 Chipset Issues ( Not Passthrough AFAIK )

I was glancing at the Mellanox Tuning guide and there was a link for Drivers for the Connectx-2,3,4 & 5.

This is what it shows for WINOF and WINOF2 Drivers: http://www.mellanox.com/page/winof_matrix?mtag=windows_sw_drivers .

Mellanox WinOF-2: Firmware - Driver Compatibility Matrix  it shows ConnectX-3,4,5 Only for Windows 8.1 and Windows 10 Client .

Mellanox WinOF: Firmware - Driver Compatibility Matrix it shows ConnectX-2 Compatible only with Windows 8.1 and 7.

Could it be because you have Windows 10 is the reason why it is not being seen? Just going by the compatibility chart for ConnectX-2,3,4 & 5.

0 Kudos
falloutboy
Journeyman III

Re: X399 Chipset Issues ( Not Passthrough AFAIK )

No both cards are detected when used on my other Windows 10 machine

perfectly fine, both show PXE boot messages on that machine and are

detected in Windows 10.

The only difference between the two basically is motherboard and CPU, one

is an ASUS Rampage V Extreme Edition 10 with an Intel 6900K the other an

ASUS X399 Prime A with an AMD 1900x, apart from that the two machines are

virtually identical.

0 Kudos