Why are these people so SLOW, I posted them 48 hours ago, rang them
yesterday and then had to re-e-mail them to get things started... sheesh a
snail would move with more urgency than this.
On Mon, Jun 11, 2018 at 2:55 AM, Chasse Court <email@example.com>
while browsing this AMD Forum:AMD Server Gurus I noticed something about a new tuning guide for the Mellanox NIC cards. Don't know if this applies to you are not. New Windows 2016 Mellanox 100GbE NIC Tuning Guide Posted on AMD Developer Central
Thanks for the thought - but unfortunately not - the machine would need to
be able to see the card in order to tune the card.
I was glancing at the Mellanox Tuning guide and there was a link for Drivers for the Connectx-2,3,4 & 5.
This is what it shows for WINOF and WINOF2 Drivers: http://www.mellanox.com/page/winof_matrix?mtag=windows_sw_drivers .
Could it be because you have Windows 10 is the reason why it is not being seen? Just going by the compatibility chart for ConnectX-2,3,4 & 5.
No both cards are detected when used on my other Windows 10 machine
perfectly fine, both show PXE boot messages on that machine and are
detected in Windows 10.
The only difference between the two basically is motherboard and CPU, one
is an ASUS Rampage V Extreme Edition 10 with an Intel 6900K the other an
ASUS X399 Prime A with an AMD 1900x, apart from that the two machines are