cancel
Showing results for 
Search instead for 
Did you mean: 

Processors

ericorg
Journeyman III

Windows 10 can't boot from NVME after installing RAID driver on a Gigabyte ab350.

I had Windows 10 home working normally on a Samsung 960 evo 500gb for a while. Then I decided to update drivers on my system. I ended up installing everything from my motherboard support page, (A Gigabyte Ab350 Gaming 3, I use a R7 1700, btw), I noticed some warnings about NVME-Raid window issues, but I thought it only applied if I tried to do a RAID array with two NVME ssds. My mistake. After I rebooted, windows 10 now fails to detect its installation on the 960 evo drive.

Automatic repair doesn't work.

Windows does see the NVME drive on the disk part tool but does not see its installation on the bootrec tool. (Using the CMD prompt on the advanced system boot up diagnostic tools)

Any ideas?

Thank you.

Erico.

0 Likes
1 Reply

Re: Windows 10 can't boot from NVME after installing RAID driver on a Gigabyte ab350.

In my experience RAID on Ryzen setups is a bit unstable, and you should use Windows 10's striped volume command for RAID0. If you're not using RAID, then you don't need the RAID drivers anyway.

0 Likes