I had just purchased and installed a 5800x in my system. I had previously been running a 3900XT and didn't have these issues.
In Ryzen Master, I cannot apply any settings because it tells me:
"Invalid count for core disabled. Number of active cores should be more than 1. Select valid values and apply again"
I then noticed, it indeed shows no cores (0/0) under About:
And, under "Core Section" there is no longer anything listed:
And Finally, the "Peak Speed" remains at 0MHz at all times:
At first, I thought maybe it was something funky going on because I changed chips without changing software or anything. I tried uninstalling Ryzen Master, downloading it again from AMD and reinstalling. No Change. I then downloaded the chipset drivers again and reinstalled. No Change. I updated my BIOS to the newest offering from ASUS, reset my CMOS and again, no change. I then thought maybe it's due to Windows being installed with my old CPU, so I wiped my hard drive and reinstalled Windows, AMD Chipset Drivers and Ryzen Master again. Still no change.
Also, maybe completely unrelated, I use Argus Monitor to set my fan speeds and monitor my system parameters, however after installing the 5800x, my core temperature stays at 0.0*C:
And under the "Overview" section, it shows core 1 at 0*C, but shows temperature for all other cores:
I had installed the newest version, which indicates it supports the 5800x, both initially and after reinstalling Windows.
Are all these issues a chip issue, did I get a defective chip? Is this a driver or software issue? Anyone else experiencing this, find any solutions or work arounds, or am I just stuck waiting for updates from AMD?
Solved! Go to Solution.
New version of Ryzen Master released in the past few days works fine. But I believe you need the latest bios as well.
Sounds to me like a detection issue, likely due to BIOS. Does Task Manager show all the cores (below), and can you run a program on all 16 logical cores? If so, report it to ASUS.
Yes, showing 16 logical cores in task manager:
I was running 3001 BIOS, released beginning of December and updated to the newest (beta, version 3202) with no change.
ASUS Prime x570-Pro motherboard, btw. Forgot that in the first post.
I just bought a new car, but I can only push the gas pedal half way down. It's ok though, they'll fix it with software at some point.
I got a new front door installed, but it only opens 3/4 of the way. It's okay though, it's still a new edition, they'll fix it at some point.
I got a new faucet installed, but they water only comes out at half speed, just a trickle. It's okay though, it's new so I could only expect it to work partially until they refine it further.
Come on... We buy things and expect them to be working. Why is it so commonly accepted for everything to still be in "Beta" at release. Especially these big corporations, they spend million upon millions in R&D, you think they'd do the same with QC. Also, with more digging online, I found posts going back to late November, people having the same issue. Almost 2 months and AMD hasn't put out a working update for Ryzen Master for all their new chips?
Was looking for some sort of head count, as to who is having this issue as well and what is the root cause... I guess I'm the only one who can't use Ryzen Master on my new $500 chip. **bleep**, guess I was a sucker to buy a 5800x before it was ready for the general public, 2 months after RELEASE that is.
It seems you tried everything you can. Does the system run stable?
Since you also tried the fresh installation of Windows 10, I think you can safely narrow the issue down to either the bios or cpu.
The next step is either try another motherboard (another brand) or another 5800X. Can you return the cpu and get a replacement?
Ah, seems it's coming to light what's going on here:
Seems chances are I have a 5800x that didn't make the cut to be a 5950x and was sold as a 5800x with 1 CCD disabled.
Cool. Now for AMD to push out an update for Ryzen Master, I suppose.
Not that I've found. I did see there is a new Beta BIOS out today, haven't tried it yet.
Apparently we got 5950x's with one chiplet disabled. Have to wait for AMD to come out with an update for Ryzen Master to address it.
Argus Monitor had an update on their website after I emailed them, that issue is resolved in their latest version.