cancel
Showing results for 
Search instead for 
Did you mean: 

Processors

ranran
Adept I

LX800 board - kernel build

Jump to solution

Hello,

We use LX800, which is based on AMD Geode.

Is there any guide as to how to configure kernel for the board ?

Can it be build just like any x86 without any specific arguments in build or selection in .config ?

Thank you,

ranran

0 Kudos
1 Solution

Accepted Solutions
elstaci
MVP

Re: LX800 board - kernel build

Jump to solution

Never heard of an AMD Geode LX800 CPU before.

This old thread from a Linux Forum might help in finding what you are looking for or at least direct you in the right direction: Gentoo Forums :: View topic - Need Guidance on an AMD Geode LX800 System

Found this website that sells LX800 CPU motherboards with specs (PDF). https://www.mouser.com/Embedded-Solutions/Computing/Single-Board-Computers/AMD-Geode-LX800-Core/_/N-...

Found this from AMD Support concerning the AMD GEODE LX1800 Processor: https://support.amd.com/TechDocs/33234H_LX_databook.pdf

Once you post your motherboard's Make & Model maybe we can see if it has a manual that can help in configuring the Motherboard also by your post you seemed to have Linux OS installed. What version are your running? Also is this a Server?

You can always open an AMD EMAIL SUPPORT TICKET and a AMD Specialist in embedded Hardware will be able to assist you. : Email Form

View solution in original post

2 Replies
elstaci
MVP

Re: LX800 board - kernel build

Jump to solution

Never heard of an AMD Geode LX800 CPU before.

This old thread from a Linux Forum might help in finding what you are looking for or at least direct you in the right direction: Gentoo Forums :: View topic - Need Guidance on an AMD Geode LX800 System

Found this website that sells LX800 CPU motherboards with specs (PDF). https://www.mouser.com/Embedded-Solutions/Computing/Single-Board-Computers/AMD-Geode-LX800-Core/_/N-...

Found this from AMD Support concerning the AMD GEODE LX1800 Processor: https://support.amd.com/TechDocs/33234H_LX_databook.pdf

Once you post your motherboard's Make & Model maybe we can see if it has a manual that can help in configuring the Motherboard also by your post you seemed to have Linux OS installed. What version are your running? Also is this a Server?

You can always open an AMD EMAIL SUPPORT TICKET and a AMD Specialist in embedded Hardware will be able to assist you. : Email Form

View solution in original post

ranran
Adept I

Re: LX800 board - kernel build

Jump to solution

Hi,

I use the following board : lippert cool literunner lx800.

TME-104-CLR-LX800-R1V15.pdf

It use AMD geode lx800.

https://support.amd.com/TechDocs/33234H_LX_databook.pdf

It is probably quite old chip...

Seems that no kernel support this board....

Thanks for the help,

Ran

0 Kudos